Search:

www.biglube.com

My wife died in April 2 months shy of 44 years.

Don't want to get into a contest either so lets just shake and leave it at that. God Bless.

You can't go home again; but how I wish I could.

whether the bullets are loaded in a cap and ball cylinder or a cartridge case; same thing applies.

You are using a bullet intended for a modern revolver. Does not cary enough lube to work well with black powder and also is too long.. A ROA and any other cap and ball revolver is rifled for a...

Lodgewood has the dies that you need.

If you are a skirmisher, why not post on the N-SSA board? Bullet is too small. Lead is too hard, etc. Get a Repine old style mould (578460 or 580460. Use around 43 gr of Goex 3 f. You are...

It's been many years now but; I called a company late one afternoon and asked them to send me a free VHS tape of one on their products. Company was in Washington State and I'm in Eastern North...

Years ago (longer than I care to remember), I read some data that you could load 45-70 to within about 300 fps. (slower) than .458 with any given bullet weight for use in the Ruger single shots. ...

25R=25reg
25L=25long

They will in mine. If they won't; try removing the block in the mag used to shorten it to convert rifle from 8mm to 7.62 Nato (not 308)

The hole should be even with the top of the pan. The fire jumps up as well as out. Don't put the hole at the bottom of the pan.

I have had two shot over the years. One I have now, my son shot with a 9mm. It stood up well with only a dent. (tough machine). The one I had before wasn't so lucky. Rifle did it in. (that was...

I use the 243 gr Lyman cast of linotype, sized .002 over, LBT Blue lube, Horn. gas check, 36 gr IMR 4064, just to touch, ( mould is beagled ). 20 inch barrel, vel. 1650 1 1/2 inch at 100 yds....

www.kanolabs.com also E bay has it

Thank you very much.

Try leveling the surfaces of the top of mould and bottom of sprue plate. I do this on every one i buy. None of them (Lee, Lyman etc.) come from the factory flat.

"For God so loved the world that He gave his only begotten Son, that whoever believes in Him should not perish but have everlasting life". John 3:16

"For God did not send His Son into the world...

How does your wife feel about another mortgage?

Thanks for the input. These are what I've been using. Wonder Wads have a dry lube and I was just wondering what it was.

Does anyone happen to know what Ox Yoke Wonder Wads are lubed with?

You might try loosening the two hold down bolts; putting a dime under the reservoir ( yes I had to look it up ) and tightening the bolts back. It worked for mine. Hasn't leaked in 20 years.

R.c.b.s.

Did you not read my second post? The other end is for the nut on the threaded rod that stops the down stroke.