I’ll go $30.01
Type: Posts; User: wmitty
Forum: Completed Deals
I’ll take the.309” Lee sizing die. PM to follow up.
Forum: Cast Boolits
Purchased 12 K of Fiocci large rifle primers in 2019 from Grafs. They have performed flawlessly for me. I would definitely purchase more; especially if at the price I gave for the original batch -...
Forum: Completed Deals
I’ll take the 47 pcs of .30-30 at $12.00 and the 45 pcs of .30-06 at $11.00.
I’m in Sulphur Springs on the east side of the Metro Mess…
P M on the way….
Forum: Hunting with CB's
As a kid in the early sixties, crows roosted in the trees of the state park about a mile or so from town here in north Texas. I assumed it was a normal occurrence to have thousands of crows flying in...
Forum: Completed Deals
If slughammer doesn’t want the Metal-matic P - 200, I’d like to purchase it.
Forum: Cast Boolits
Wouldn’t the boolit be laying on the bottom of the chamber rather than resting in the throat upon firing? Seems like the accuracy would be “ negatively affected “ by this arrangement. Have you...
Forum: Cast Boolits
I have the old style mould in 8 mm Maximum design and it works well with wheel weight alloy; but as others have mentioned here, the casting rate must be rapid and the alloy hot in order to produce...
Forum: Cast Boolits
What’s the normal land diameter for a 9.3 x 62 ? And how much over land diameter can the boolit be sized to and still be successful as a paper patched projectile? Seems like Pdawg shooter recommended...
Forum: Cast Boolits
Popper
What boolit and what twist rate on your AR 10 barrel? Nice shooting!
Forum: Smokeless Paper Patching
It appears you are describing land diameter ( bore diameter) as opposed to groove diameter. The correct way is with pin gages. It is possible to use a bore rider boolit if the land markings are...
Forum: Hunting with CB's
Was it cool enough where you took the hog to make it worthwhile to attempt to cut it up and save the meat?
Forum: Leverguns
Bloodhound 689
A cast boolit normally will not produce as high a chamber pressure as a jacketed bullet/ load with projectiles of the same weight, as long as variations in seating depth are not...
Forum: Lead and Lead Alloys
A quicker way to check a wheel weight to determine alloy is to attempt to bend it with your hand. The lead/antimony alloy is malleable and will bend easily if not too short. The short ones can then...
I have that mould design I believe. It’s the rcbs Spitzer 180 grain gas check with the bore rider ogive and very small meplat. If you have a bore diameter that is preventing the boolit from being...
Forum: Completed Deals
Does the tripod come with it? Just kidding; I have the identical revolver and I really like it. The mass really helps tame the recoil of the .44 Mag loads. I wish you good luck in finding it a new...
Forum: Lead and Lead Alloys
If you can accurately weigh it in air on a balance and then measure its volume by submerging in water and determine its density, you should be able to determine whether it is Lino…
Forum: Completed Deals
I like your sense of dissipated humor! I’m not sure if # 5 : 80 pcs RP .22-250 brass is already sold. If not, I’ll take it. P M headed inbound.
Forum: Completed Deals
I will take them. PM headed your direction.
Forum: Completed Deals
Trying to make sure I understand:
Total of 43 pcs of empty brass
Total of 36 rounds of handloaded cartridges
Total of 16 factory loaded cartridges
Is this correct? If so, could you tell...
Forum: Hunting with CB's
Winger, that has to be the most demonstrative picture of all time in regards to describing the “ not my job” attitude!
Forum: Hunting with CB's
The Armored Dillow is best dispatched with the Lahti 20 mm round. If that’s not available, a .22 will usually make ‘em jump remarkably high with a body hit. They are so blind I’ve had them walk up...
Forum: Deep Theological Discussion
Jesus told Peter he was blessed because he had been taught by the Father as to who Jesus is. Matt. 16 v 16 - 18. He then says that the foundation of His Kingdom is that everyone entering His Kingdom...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |