Best loads for me so far with the Lee bullets and VV N110:
- 120 RN GC 11.6 N110 (OAL 1.59", 1861 +/- 8fps, 3.2 MOA)
- 100 RN 12.8 N110 (OAL 1.58", 1994 +/- 10fps, 3.2 MOA)
- 90 SWC 12.8 N110...
Type: Posts; User: swisscast
Forum: CB Loads / Military Rifles
Best loads for me so far with the Lee bullets and VV N110:
- 120 RN GC 11.6 N110 (OAL 1.59", 1861 +/- 8fps, 3.2 MOA)
- 100 RN 12.8 N110 (OAL 1.58", 1994 +/- 10fps, 3.2 MOA)
- 90 SWC 12.8 N110...
Forum: Cast Boolits
Scrummy, I’m in the fortunate situation that I can benefit from surplus of an old product no longer used for manufacturing at my workplace. It’s a commercial epoxy polyester hybrid powder coating,...
Forum: Cast Boolits
I’m routinely sizing down .430 to .415 in order to get bullets for my single loader K31 chambered in 10.3x60R. For me this is working with bullets ranging in hardness from 8 to 19 HB using the...
Forum: Cast Boolits
I also always wanted one. Also for no real reason. Since the 80’s. Together with an Uzi, a MAC-10, a Sterling, a Dragunov... the list goes on. Got one when the semi auto version from Czech Small Arms...
Forum: Cast Boolits
I’ve got a similar task sizing cast .430 bullets down to .415 for use in 10.3x60R (.450/400 2 3/8“ Nitro Express), which is still quite popular in Switzerland. NOE C432-265 RF, MP C434-215 SWC, MP...
Forum: Group Buy Archives
One 8 cavity aluminum, PB, solid with lube grooves, .311 dia.
(swisscast) sondmar at bluewin dot ch - .311 - 8 Cavity PB
Thank you!
Forum: Cast Boolits
For me reloading with cast for the Swiss 7.5mm revolver model 1929 was quite an interesting and satisfying project. Although these old service revolvers are abundant in Switzerland and quite...
Forum: Cast Boolits
Both my two and six cavity 356-120-TC's drop .357 bullets, although I had to beagle the six cavity mold slightly to get there. I run them through a .358 Lee sizer (not really necessary), lube them...
Forum: Group Buy Results
Please add me to the list: one 4-cavity mold with large HP pins.
swisscast AT bluewin DOT ch
Thanks!
Forum: Group Buy Archives
I'm #41 on the updated list and still in. Thank you for the effort.
Forum: Military Rifles
Based on what I'm able to read on your butt plate tag, the rifle belonged to a Richard von Wyl, who was probably born in 1907, served in the army medical corps in a transport column and was living in...
Forum: Group Buy Archives
Please add me to the list - swisscast at bluewin dot ch
1-mold, large HP pins, extra set of flat pins
Thanks!
Forum: Group Buy Archives
Received my first 4-cavity molds three weeks ago – a 359-640 HP and a 454-640 HP. To say that I’m highly impressed by the design, build quality and ease of work with these two beauties would be a...
Forum: Group Buy Archives
Received my first 4-cavity molds three weeks ago – a 359-640 HP and a 454-640 HP. To say that I’m highly impressed by the design, build quality and ease of work with these two beauties would be a...
I'm also pleasantly surprised about the lack of leading of the .356 sized bullets in the P220 with a .357 barrel. Due to the leading in the Uzi (.356 barrel) I'll do the next test with #90303 bullets...
New to casting I think I’ve learned a lot at this forum and I’d like to share some of my humble results with you. This is my first post and English is not my native language, so I apologize in...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |