Search:

Mark Lee Express blue would be my choice. I use a heat gun to get the clean metal hot, or a hair dryer would work. You can keep repeating the process until you get the result you want. It turns...

timney and Bold make adjustable triggers with safetys. the trigger guard would be a major undertaking. I don't know the hole spacing, but the tangs can be lengthnd or shortend, but the 91 feeds from...

I need one or two of the Turk actions and can't find one. I made a lot of custom rifles using that action. You can rethread a Remington 700 take off barrel, and it is possible to adjust headspace for...

Handbook of cast bullets could be the first edition. dated July 1958.

I have a Lyman from 1958. it lists 2 loads for 4759, with the 405 grain bullet. 23 and 24 grains. says 2 inch group with the 23 grain load

Mark lee and a heat gun

Todays ammunition isn't on par with the old ezexs or even the old greasy experts. I had a 40x, with a 20x, that was a one hole rifle at 100 yards, on a windless day. Never found a satisfactory brand...

I have a Tasco scope, 4 x 20, 1 inch tube, about 8 inches long. It has a flat block made with the barrel of the scope, attached underneath. This mates with a 1 piece mount. , that fits weaver bases,...

I use Mark Lee and a heat gun. works for me.

I have a used sump pump for sale, but it's 110. You can get converters for traveling to areas that have 220 current.

I have some walnut slabs that would be big enough. I dont know about color match, but that is what stain is for. I would have to look, but I can probably send you a piece. You want a straight grained...

I thought it was Herco, without looking anything up

I would face the shell holder off. Unless you lock the lock rings down, it doesn't matter if the shell holder has a few thousands removed. Just adjust the die for it when you screw it in.

It's worth 200, can always rechamber it or rebarrel it.

I don't know what you are shooting, but I would go faster than 1 in 10

White Rock in KC MO is the best and cheapest I have found. No web site, call 816 454 0478. Allows 30 days of usage.

My burn rate chart lists titegroup as just slightly less than bullseye

probably get better accuracy from standard primers. I have used magnum in almost all rifle calibers for years, but usually with ball powder.

I had the best iron sight setup using the amber disk in the globe and a narrow post set at 6 oclock and bent to the bottom of the front aperture to prevent canting. just a process of centering all...

For a snake load, forget the shot capsuls and use a gas check over powder and one in the case mouth.crimp it and some elmers glue.

bought 50 pounds of wc852 when clinton got elected, from Pat McDonald. Loads everything but .223. similar to 4831

I have a lever that came with some parts. I seem to remember iver johnson, but not sure. I will send it to you, see if it is what you need. pm me an address. Daryl

white rock tool and die, 6400 north brighton ave, kansas city mo 64119 Last I knew the guy didn't have internet. He will rent you a die cheaper than anybody. Send him a letter.

You don't need anything more than some 8 shot and some gaschecks, and elmers glue. You will get better patterns without a shot cup. I loaded .38 special with a fast powder, inverted gas check over...

I think I have some unprocessed, I would have to look to see how many, if you are interested I must have sold them, can't find them