Search:

+1 except 39.5gr IMR4350 and a custom 220gr boolit chronos at 1950fps

Are you weighing and sorting your cases? My group sizes decreased by almost half after I started weighing and sorting both cases and boolits.

Also, have you tried any other powders? There is a...

Welcome aboard!

This question seems to pop every once in while. Here's one thread:

http://castboolits.gunloads.com/showthread.php?t=51342

As you presumed, most likely not beeswax any more.

+1

Muskrat Mike -

I was in your situation about five years ago and that No 4 was the reason I got into casting. Now I have three 2-groove No. 4s with groove diameters between 0.318 and 0.320! ...

My CZ 527 seems to prefer, in order, the BRP 226-47, Lyman 225438, NOE 225107.

I've discovered that cross reference to Savage 620 in several places, but that's a shotgun. The Western Field Model 31 22LR was a Mossberg Model R made for Montgomery Wards, as far as I can tell. ...

Thanks LUCKYDAWG13. Numrich was no help but I found a lot of useful info on rimfirecentral. Unfortunately, this mount didn't look like any of the pictures I found.

I'm going to try Dick Williams...

I recently picked up a old Western Field Model 31 that has a base for a peep/target sight (see picture). Since I went through the trouble of making a new firing pin and the rifling is in great...

I measured approx. 1 inch longer stroke for the Classic.

I have one of each. Both work great.

IMHO, the spent primer catcher/disposal system on the Classic (Cast) Turret is worth the price difference alone. The ram is bored through the bottom allowing...

Ben,

Thank you for posting this. I have 3 old pawnshop guns with bare ends. Maybe it's time to fix them.

I've glued them with Gorilla Glue and JB Weld. If they're cracked, I wrap with heavy tape first.

I've had the same results. I would go with the Lee 454-252 SWC

My load was 3.0 grs of TrailBoss. Let us know how your quicker loads go.

For a starting point, I shot 10 rounds (22 Hornet CZ 527 1:16 twist) yesterday at 100 yds. Est. velocity ~1400 FPS. Overall group was about 5" with 4 shots touching. Bullets were unsized WQ PB/WW...

I don't have my notes, but I to say around 1.640" for a CZ-527. Just covers the lube groove.

Received mine in the mail today. Beautiful as always Swede!

:CastBoolitsisbest:
Glad I could help!

Try changing your editor options under the User CP.

Under "Settings & Options" (left side of screen) select "Edit Options".

Look for "Message Editor Interface" near the bottom. You should have...

Mine arrived 04/02. Looks like another excellent NOE product!

It can be done. I modified a set of Lee handles after reading about here a few years ago.

Here's a thread that will help:
http://castboolits.gunloads.com/showthread.php?t=91982

IIRC I...

Payment mailed today. BTT

Payment mailed today. BTT

I think the tag would have to be added to available bb codes by the site manager, if possible. Just a guess.

Wasn't there an upgrade a while back? [s] may have been available before the upgrade....

Jim,

PM sent regarding my new shipping address.

-Joe