All ruger revolvers are left handed. That is why the loading gate is on the right side!!!
Type: Posts; User: buckbeans
All ruger revolvers are left handed. That is why the loading gate is on the right side!!!
Forum: Reloading Equipment
I am loading with a single stage setup for straight wall pistol brass and was wondering which expander die most folks preferred. I am using a lee and thought the effort to expand brass was a bit more...
Forum: Reloading Equipment
what about using some zinc from all those wheelweights.
Forum: Hunting with CB's
Are these the same pigs now making front page on Foxnew.com?
Forum: Boolit Lube !
cyberguy
I just shot 100 rounds of a 452 255 grain regular groove semi wad cutter lubricated with 45/45/10 and shot clover leafs and had no leading
Forum: Lead and Lead Alloys
AZ Rick
I'am in Tucson and I have a spare Lyman thermometer
Pm me if interested
Forum: Factory & Surplus Powder
BCB
The powder canister is still in the box, where do you find the lot number?
Forum: Factory & Surplus Powder
I just bought some Winchester 231 locally and was offered an 8 lb jug of WC844 for 80 dollars. I was thinking about using it for a 223 that I haven't bought yet!!!
Just wondered if I can get some...
Forum: Special Projects
it depends on how many undersized revolvers you have. If you plan on only one then send it to cylindersmith who will do it for 30 dollars plus shipping
I sent him my blackhawk 45 colt. Throats were...
Forum: Boolit Lube !
Car interior in southern arizona can go up to 200 degree's per master google
Forum: Reloading Equipment
I can see mikeinco's point of view.
The more your handle the more chances for error.
The guy does have a point of view shared by otherrs.
Forum: Reloading Equipment
I have an old CH C press that I am selling for a friend.
Pm me if interested
Forum: Reloading Equipment
Just heard a fellow at the local sportsman's warehouse claiming that there is more room for errors with a single stage press than progressive.
This is clearly a first for me.
Does anybody have any...
Forum: Cast Boolits
The problem with smelting in your furnace is that if enough sludge gets into the spigot it will drip, drip, drip.....
PM sent to Cidirkona
Forum: Boolit Lube !
If you wait a little bit, you can get Recluses fantastic concoction consisting of Xlox, JPW and mineral spirits already bottled.
Forum: Boolit Lube !
So the double application only applies to the non TL boolits that require sizing?
Forum: Boolit Lube !
chris
did you have any problems with drying the LLA after using the silicone spray?
It looks like there are a few people besides who also want to avoid the first pre sizing coat
Forum: Boolit Lube !
Elkins . The case prep lube spray from Dillon is what I was thinking about.
Forum: Boolit Lube !
thanks gear
but it is because of recluse's 45/45/10 that my simple method is possible. I could not do it without the combination. By the way, what was the final decision on naming that fine...
Forum: Boolit Lube !
I live in arizona and it is 108 degrees outside and my car is probably 130 degrees right now and that stain is real easy to rub on the carseat
My method is still in its primary stages and needs a...
Forum: Boolit Lube !
I started out tumble lubing and like the result. However as hard as I tried to ignore it, I hated seeing the lube on the nose and base. . So after sizing and lubing, I found myself wiping off the...
Forum: Boolit Lube !
Hello Folks
I want to avoid the first tumble lubing step when using the lee sizing system by using a case lubricant(dillon) before sizing. Do you have to do anything special to wash off the...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |