Search:

I've used Plain Expanded Metal Sheet from HD or any of the others. I only expand it out a bit to give me the right size holes. It's a little more aggressive and IMO cuts through the dirt and stuff...

Hodgdon has no trouble doing it ..

Even when I added the request for any data on their powder and their bullets this was the reply.. " Alliant has no tested load data for the 41 Rem Mag for while using the Power Pro 300-MP." I've been...

I was looking for load data for Power Pro 300-mp , their web page had nothing on 41 mag loads. Lee , Sierra and others provide loads for bullets they do not make or make molds for . I thought it was...

I supplied Alliant the bullet, bullet type , case , primer, revolver, barrel length and the caliber (41 magnum)
And this was their reply .. So much for ask the expert ..

Load data is based on...

41 Mag load with Alliant Power Pro 300 MP and Rainier 220 grain plated flat point? Several of the other powders I have tried have not really given me the results I wanted. BUT the manuals do not...

well it turns out that the output on the PACT is 12 volts AC. I ended up going to Fry's and getting a small line conditioner for $60. That solved my problem.

I have a PACT powder dispenser that is getting interference from my whole home A/C.

I contacted PACT and they said that if the scale does not see 2 matching numbers
it will not proceed. A line...

the 140 grain boolits don't get a lot of press so . I'm going help a bit. I loaded and my wife and I shot. 200 rounds of 38's with 3.0 grains of Trailboss , very accurate with low enough muzzle flip...

I do need to provid pictures.!!! They are not tool marks .. I am a plastic injection mold maker.

Thanks for all of the replies. When I turned the flow up the boolits were MUCH worse. I'm going to try smoking the mold. I've already cleaned it and cast about 100 boolits. The project has been...

boolits are totally filled out with wrinkles . Alloy is close to Lyman #2. I have smelted a fairly large quantity of this alloy and it casts well in 357 and 41 caliber pistol boolits. I bumped the...

I've been casting boolits out of this mold for a few weeks now.

Here are a few of my pointers please add anything of value you might have.

#1 It is by far the hardest mold, to get good boolits...

What are you using to alloy up the tin level? 60/40 solder is about $20 a half pound at any of the big retailers..

part Number for the little square with the square hole is : TF3567
http://www.titanreloading.com/turret-press-square-ratchet
.
.
part number for the clamp is ...

100% it depends on how far I'm shooting. If I am shooting a silhouette match I weigh the boolits to one grain. But for hunting and anything under 50 yards I do a void QC check and shoot them.
Unlike...

I'm afraid the Safety officer is in the good old boys club. The place is controlled by the life members. Going up to the board would be pissing into the wind. Now the guy who oversees the place has...

Odd you would mention ID's and busy-bodies .. One other friend, a member, was talking off to the side . Another member comes by and starts complaining that his bore flag was not visible enough. He...

Something I should have added is that he is one of the safety officers .. Busy Body

QUOTE:
"I just never understand why some folk simply MUST get involved in other people's business when it is no...

We have had some berms collapse due to the record rain we have been having. As a result they are going to get a bulldozer to move the berns back and flatten them out a bit. My friend and I in an...

I shot about 80 rounds of 41 mag coated with 2 coats of green. 2 thin coats. I only coated 80 boolits so I used .5 cc of catalyst , 2.5 cc's of color and 3 cc's of acetone. baked and repeated . This...

I purchased 1/2 liter of the green and 1/2 liter of the red/bronze to share with a friend of mine. I'm hoping he will post his results and will not steal his thunder. He did all of the work. He put...

You guys rock !!

I am in the process of guilding the area right in front of my garage with range lead .. Not on purpose .. :cbpour: it's just happening .

What if anything do you put down to keep from metal...

I just saw Wally World had a convection oven for $39+. Before that all I saw was toaster ovens in the price range with the convection ovens running $60 +/-
Thanks .. K