Search:

I think that giving the 1.240" for the CPA the 1.125" for mine sounds about right. But like Gunlaker says, there is reference to a heavier frame, which the 52 is supposed to be.

Now for an update:...

Thanks chill, the pin is tight and I didn't want to force it, guess I'll soak it for a while.

I have removed the stock, trigger group and hammer for cleaning, all came out easily.

Now there is a cross pin that the lever pivots on. There is a threaded hole running vertically that appears to...

Thanks for the info on C. C. Johnson, it would be great if I could find some history on this rifle. I imagin someone changed the barrel because of black powder fouling. We've all seen it ruin a...

Here's some additional interesting information.
In the book I mentioned above, Mr. Grant cites:
"The standard 44 1/2 action and higher grades of this action--models 45, 47, 49 and 54--were made in...

Chev, those are the lines I'm thinking. To use Tungsten in a medium of stock bedding, since it is actually designed for that use.
The lead is not an option since two postings of similar bad results...

It's a 22 L.R. now, but as I mentioned it has been re-barreled. The barrel is 28", 1.115" at the breech and .995" at the muzzle.
Add that the butt stock is 3lb 7oz without the butt plate, is quite a...

I'll get you that picture of the stock later today, you'll have to tell me of your special interest in that area, I'm curious.

When I removed the butt plate, I found the stock was drilled filled...

120243120244120245120246Hello all.

Just acquired a new toy. It's a Stevens 44 1/2 model 52!

Needs a little TLC but it's in pretty good shape mechanically.
Been re-barreled with a Douglas in...

Well, the guy travels some and has been hard to pin down, but as long as his price is reasonable, I'll get it.
I've been kicking around for a 40-65 for a while.....too long!

John Boy,

I dIdn't post the rumor, I am here seeking information from those more experienced than I.
It's an exchange of information.

Interesting link Rick, I did some searches but did not...

As far as where I heard this, let's just say probably an internet rumor.

What Id id was to write Pedersoli directly, I got a reply in one day!
They were surprised that the "rumor" was still...

So now we're getting some good options .Tool steel I can get and file and polish to fit.
I'm still a little grey on the hardening. I have the solder pot for tempering, But can you detail the...

I'm working on a revolver for a friend, it's an Erfurt model 1894.
What I need to complete it is a spring for the loading gate.

It's a flat spring with a hole on one end for the mounting screw...

So now that I can date it, what years had the soft receivers?

Thanks for the info, I was concerned it might be an older one of poor quality.

So a buddy called me to tell me about a gun he thought I would like. (is he kidding?)

It's a Pedersoli Rolling block in great shape.
Caliber 40-65 Target sights, 36" heavy barrel, 1" at the...

Need a little help.

Anyone interested or have knowledge of this gun?

OK, the sight will NOT be bent!

As far as the trigger pull, Long Hunter did a fine job, light and crisp, even installed Lee's "Gun Slinger Springs"

The forcing cone was cut and the barrel...

Yes, years ago I realized the time of the bullet in the barrel during recoil (muzzle rise) will cause the slower chunk of lead to impact higher.
Never did like the "to the left" thing though.
...

I shoot two styles of WCs. One has a crimping groove about 1/16" from the end, this I seat with the 1/16" sticking out.
The other is a DEWC with no groove and is seated flush.

Another good reason...

Took the wheelgun out tonight for some fun.
It groups well. Increased my load from 5.0gr to 5.4gr Trailboss.
Still hitting high and to the left. I will eventually try a lighter bullet to bring it...

8511585116

8511385114

851108511185112