Search:

Hoping this helps others looking for a supersonic cast boolit that works well in an AR. First I bought the Lee 160 grain mold and no matter what I did it would not feed in 2 different AR's. I then...

The NOE feeds great in 2 different AR's

For those of you reloading 300 blackout using the NOE 310-135 mold, what are you setting your C.O.L at.

I ended up ordering the NOE 310-135, I'll know by the end of the weekend if it works. I think it will, it's much shorter than the Lee mold, it is also tapered a lot more.

H110, they work great if you single feed them, they won't feed out of the magazine

This is another I am looking at, have you tried it?

I tried both of those Lee dies and neither one will feed in 3 different AR's, C.O.L. 1.975

Hi everyone, I know this has been asked a lot, however after 20 hours of searching the internet I have still not found a definitive answer. Is there a mold that drops a 130 to 150 grain boolit that...

Looking to buy a NOE 310-135 mold, any configuration and any cavity amount. This will be used to cast 300 blackout loads. One more thing, if anyone has a few projectiles cast from this mold that they...

Thank you everyone for the advice. So it looks to me like you can't get in to this hobby for under a grand. I am definitely going to have to do some thinking, that's more $ than I expected and the...

All the lead I have is cable sheath lead so it's pretty much pure other than a few solder joints, but when I tested it's bnh it was just a little above pure

I'm thinking about getting into making .224 projectiles from .22 lr casings and scrap lead. Can someone please tell me the cheapest and easiest way to get setup for doing this. I have watched many...

Thanks everyone for the info sorry about the double post

I'm testing it using a lee hardness tester which for most of my other testing has been very accurate, I have some pure lead and when testing that it comes out perfect. I am going to melt down a bunch...

I got a box of what I thought was linotype yesterday and it tested a bnh of 15. Just wondering if any knows why it's is? It is type lead cause it still has the words on it from a printing press it...

I got a box of what I thought was linotype yesterday and it tested a bnh of 15. Just wondering if any knows why it's is? It is type lead cause it still has the words on it from a printing press it...

Alright all you iPhone iPad users out there time to get quickload to build a app for there software so let flood there inbox with email requests for a app hopefully enough requests will make them do...

Ok thank you I will search for them have not had a lot of luck using the search feature

I just recently acquired a savage model 11 .308 and I plan on shooting a lot of cast boolits out of it looking for some first hand advice of peoples favorite cast loads. I am going to be using the...

I would like to start a thread dedicated to 300 blackout cast load recipes I've searched all over the forum and found it in many different places I would like this thread to be just your recipe and...

The first coat did no get good coverage a little clumpy they sized fine but now I think I may have to expand my cases a little to load them

Sorry about the typos damn iphone auto correct

So I just finished my first powder coated boo lots they came out great took me two coats but they look nice so here is what I did. First I cast 20 bool it's from the lee 160 gr. 312 mould I then...

Thank you everyone so much these are the exact responses I'm looking for, the whole point of casting is to save money and if I have to buy tin at fairly high prices it kind of defeats the purpose.

For some odd reason I can not cast shiny boolits I ordered a thermometer but it has not arrived yet, so I'm just looking for opinions on why no matter what I do my boolits go right from wrinkly to...