Search:

delite message, found the tool

L.O.L. thanks to share some light, I felt pretty stupid... i don't know how my mind was thinking . !!

where did you find the .424 sizer i look at Lee kit and the closest they have is .427 only . if I use some 400 grit on a cloth over a cleaning mesh in a drill you think i could get the .003" off ?

tks for your replay.

Good day to All,
I am in the process to the final stage of building a .404 Jeffery using a Mauser 98 modified action and a Lothar Walter new barrel.

I will plan to cast boolits 400 grain GC...

I replaced with Redfield peep and plug the opening on the wood of the upper hand rest, since some one ad already removed the original rear sight on mine.

78619

7706777068

I reload 7.7 jap. using 06 brass resized in 7.7 FL die and trim to length. Above a 5 shoots group using Hornady 150 gr.Spire over 46.0 gr. of IMR 4895, the lower 10 shoots group are...

Aspangler, if you start your project with a 98 action, you have multiple choice, however if the action is barreled and the bore is good 8x57cartridge is excellent as is, if you want more punch with...

Thanks for sharing your technique W.R. Buchanan, I like the look of your finish handle a lot, I will try it on my next rifle.
Where do you source the big knob??

Thanks Nekshot, .... definitely mig is the way to go, I put the heat shank in, set up the parts on the jig, put the heat paste on and the shop next to my house take few minute to weld one on.

The following are cut off and re-welded on at proper angle using the same cut off bolt stub , finally shaped and polish.
6.5x55 Swedish Mauser, 6.5x54 Eaton Carcano, 8x64 Mauser and .300 Win.Mag.

Personally I find easier to cut off the bolt handle and replaced with a handle of my choice, I feel it make cleaner/like factory finish. Here some replacement I did with commercial bolt handles on...

I do not think the rain could cause the problem, is not worst than hunting in a rainy day.........
Once I had a problem with a new Browning .338 out of the box first box of ammo perfect than start...

Thanks swheeler, Honduras rosewood .

Yes this is one option provided the trout is ok for the 8mm bullet, assuming he had re-chamber with a 308 norma mag reamer this rifle has no trout for the 8mm tip. Also he need to fine a reloading...

Hello Dirty-06
If you or some one cut a new chamber for the 308 Norma Mag on a 8mm 98 mauser barrel and fire the new cartridge with it, the results you are experiencing is normal.... .308 (7.62mm)...

Here my Savage 219L , 30/30, 20" barrel. I use the groove on top of the barrel chamber to install a Weaver mount for the scope.
The let off on my trigger is not so smooth....!!
72465

Personally I never ad to take a shoot outside 125 yrd. If condition will arise I would feel comfortable with 2 of my rifles (.300win mag & 7mm rem mag ) up to 400 yrd. using some rest because I had...

It depend from the rifle and the person using it. Set up with peep I find a little more accurate than buck horn, however at 100 rested it should work inside 2 to 3" .

A word of caution with wide trigger shoe on a hunting gun. Maybe is just me... here the facts: several decade a go I had ( still have) a 7mm mag that had a little hard trigger pull, so I installed a...

Fine piece and excellent restoration on the stock!

keep mine in the original containers in the basement of the house with my wine.... if temperature is good for the wine should be good also for the powder! Minimal variation summer/winter no humidity...

Only use hornady. Once I try aluminium bought on line, the low price attraction ..... then I notice that many fall off just as I tossed the boolits in the box, I stop, remove all of them with my...

never below 1/2

My son Eric second rifle, and the first that he bought with his own saving, almost 25 yrs a go was a win. 32 spl. He paid 150 dollars and the rifle was almost like new, and still look as good ( I...