Search:

Glad to know their quality and customer service. Don't think I'll be ordering anything from them now.

I had fits with one of my 550s one day. Same thing, every primer was about .005 from being flush or below. No matter how hard I pushed it wouldn't seat and the primer wouldn't be deformed any. Long...

Some old faq I ran across. You can change temporarily if you retain old parts and no notification is required. Change it and get rid of the parts will require atf notification. Put a 16 inche+ barrel...

I'd have to dig through some stuff but I don't believe that is 100% true. Permanent changes should be amended with the atf. Temporary changes do not. You just need to retain all originally configured...

I've got one that uses tubes if you change your mind.

I believe I have a set of dies laying around. I'll check and let you know.

I've got an extra tool head set up in 12ga. I know it's not the right die set but maybe it would be of some use to you.

I had a pound of 4320 do the exact same thing. Walked out and saw powder all over the ground to notice the can was about half ate through.

Bump.

Bump.

Bump.

Part number 99000

Sorry for leaving that out. 99% sure it's 16.5" but I'll update the original post in the morning.

Want some more room in my garage so time for some cleaning. All prices are plus shipping unless noted. Money orders or checks from long standing members with good feedback.

1. Lee single.stage...

Once again projects I planned to get to have sat around too long. All prices are plus shipping. First I'll take it followed by a pm gets it. USPMO or checks only, ships after it clears unless it's...

Once again projects I planned to get to have sat around too long. All prices are plus shipping. First I'll take it followed by a pm gets it. USPMO or checks only, ships after it clears unless it's...

Once again projects I planned to get to have sat around too long. All prices are plus shipping. First I'll take it followed by a pm gets it. USPMO or checks only, ships after it clears unless it's...

Found a pair in my pile of stuff. Pm me your number or email if you need pictures. Don't know a fair price for them but feel free to make an offer.

I've got a couple of those somewhere. Never tried them out though.

I wouldn't melt it. Shot has been running around $65-$70 per 25lbs lately. Nice score, just load it and shoot it.

I have 7 once fired and 30 new .300.
69 once fired .257.
18 once fired .270.
49 once fired 7mm.
Send me a pm if you're interested in any of them.

My standard small Dillon bar is set at 2.8 gr of bullseye and is measuring consistently.

650/750 quick change kits are $160, conversion kits are $115, Dillon dies $125-$140. Roughly $400 each for a complete caliber change. $815 for a new 750. A 550 is $619, conversion kit is $70, quick...

Looks like most new brass to me. I always size and trim new brass.

I had a similar issue on my 650. If they hand prime ok it may help to make sure your shell plate indexes correct. I had to adjust the black indexer on the left side of the frame. Is your powder check...