Search:

Zrust makes a VCI for brass that you can also place inside the closed container.

http://www.alleysupplyco.com/default.asp?pc=sl

The instruction with the one I have recommends the unit be returned to the factory for adjustments.

Here is a link with some info

http://www.accurateshooter.com/technical-articles/corrosion-protection-products/

I tried SWC's in the XD with only 1 in the mag and did not have any feed problems. After 10 successfully attempts I loaded 3 in the mag and this is when the problems started. The reason for the...

Here is some info to further confuse the issue..

http://njhighpower.com/cart_tech.htm

You can find a lot of information at the following site.

http://www.xdtalk.com/forums/

Here is the AMU's M14 Accurizing guide.

http://www.m14.ca/accurizing/m14_m1_accurizing.pdf

Here is a link with some M14 Info. There is a link on the page about bedding a M14.

http://www.imageseek.com/m1a/

Thanks for the post. I have had this on my watch list for a while now and could not decide to purchase it.

My rifle has a Wylde chamber and I have not needed a small base die.


There are several chambers used for the AR-15 and I do not know how they compare or if any need the small base dies?????

You would think with all the bad press they have received lately they would be more accommodating .....

I do not know if this applies to these primers......

It seems that some of the Russian magnum primers were standard primers with a thicker military type cup. ( It seems there was a translation...

Memphis is one of my favourite city's . You can eat in a different rib joint every night of the week. One of my favourites was the Pig-N-Whistle. Of course all the ones we ate at were great...

+1 I have heard this from several very good shooters.



I was also told that conditioning was important and you should do your conditioning by practising shooting......

May not help your cause........ and cause you some grief..... but you might bring up the concern over lipstick....
...

I only missed a couple of days of work. The first week was the worst due to the bandage. My palm was tender for several months , but the only time I really noticed anything was when I opened...

Here is a burn rate chart that may help.
...

Brownells purchase Sinclair a few years back. (I use to make a road trip to Fort Wayne to buy my powder and primers.) Brownells purchased Sinclair, closed down the Indiana sales operation and...

I thought it was spelled "Brownells". :twisted:

I recently ran across this advice and the reason given was that the 1st alcohol to distil is poisonous.

From what I have read about similar incidents, I think it has more to do with the local managers the corporate policy.

Read a post on another board about certain Indiana's WalMarts saying it was...

I have had good luck with light oil and 0000 steel wool. A friend recommended using RB-17 and 0000 steel wool and this combination seems to work better.

http://www.pjsproducts.com/rb17.htm

:confused:Here is a link to the FBI report.

http://www.fbi.gov/about-us/cjis/ucr/crime-in-the-u.s/2011/preliminary-annual-ucr-jan-jun-2011/data-tables/table-4/table-4/view

I also wonder about...

I have not used it, however my brother has tried it for short range matches. He reported that is similar to Varget and RL-15. He added that is suppose to be less sensitive to temperature changes...

There was an article in Precision Shooting comparing binoculars. I do not remember the price range, though I think it was low mid-range on the prices. I believe the author recommended the Leupold...