Search:

I have a 870 18 1/2" barrel with Rem choke tube set for it,I also bought the Hastings long Paradox rifled choke and found that it threw slugs all over the place, thats with my loads and my experience...

it would be very crazy but neat if ya could build a bolt action with a BP type rifling, a .72+ caliber varmint rifle? it'd be scary to shoulder that rifle and touch off a round!

thank you

thanks OSO I'll give it a try, one more question, what is weight of 15 #1 balls in a fraction?

oso,I tried figuring a no# 1 buck load with 15 balls WAA12R wad and 28 grs. hs-6,I come up with 607.5 gr. weight for shot charge,I figured 656.25 grs. for a 1 !/2 oz.weight load, I have Lyman 3rd...

I did stack them that way, but if ya notice 3 stacked the next 3 stack right in the spaces between balls, and the 13th ball just barely fits and crimps, the weight of balls comes
a 1 1/4 load =...

28 grs. works but I cant say how well, not much recoil with13 pellets, my 870 improved choke
barrel put 5 pellets in a 12" target at about 40 yards, and penetration on a 3/4" plywood at same...

OSO, right on with 13 pellets =526.5 close enough to 1 1/4 oz. and my starting load is 28.6 grains of hs-6, wierd pellet count and thats what fell from my number 24 mec powder bushing,
I used no...

I had a lady whos husband passed, give me about 13 pounds of 1 buck, the only powder I have is HS-6, hulls AA and AA-HS, primers Win 209, I have W12r, w12f114,
and 7/8 oz wads, now I figure 12...

VdoMemorie, again 32 grs. of hs-6 is a nice load that wont take your shoulder off, and still kill a deer or most anything in the USA. why does Lee post that max load and why do people have to go max?...

I'm loading and shooting the Lee 160 gr. gc bullet tumble lubed and sized to .311 which is how I get gas check on and bullet is well lubed,Ive been using H-33523 grs. and just started using BLC2 24...

that bullet is perfect, I size mine to .358 just to smear alox thru lube grooves, wipe noses clean so no pile up of lube, and yes 3K or more and still my favorite kick around load.

thanks

its a Lyman 195 gr lead RN bullet, I figured 200 load would work, does anyone have load data for this bullet, I dont want any super speed, I had a original WW yellow box of lead RN 200 grain M+P 500...

what are wheel weights in tin and lead ? my bullets and slugs are very hard cast. 20% tin or more?

buy a saddle mount and a small variable scope and you can adjust that to point of aim and its easy to see, or a short 18 barrel rifled with rifle or ghost ring sights, I just bought a 18" barrel with...

VdoMemorie I like your use of nitro cards and over shot cards, we'd be using TP to adjust wad height, there are no written loads that fit some hulls as written in alot of load manuals, good show of...

charger , can you tell me any info on mt NO4 MK1 ?serial no. F(FTR) serial number starts with AO
onthats on reciever, on the buttstock to trigger metal area is England beneath a AO and below barely...

I meant max load is 35 grs according Hodgdon sie with AA hulls,Lee puts max at 36, and I;ve seen posted here people saying 37. no I hate being smacked by 36 gr loads that Lee states with mold,I...

how many grains of HS-6 in this load ? hs-6 is all I've been using for lee 1oz slug, 32 to 35 grains . AA hull Winchester 209 and CB12f114 wad,

http://sites.google.com/site/papcharlieshulls/ lits gold STS for .5 a hull , and I never knew that a press came without a sizer? I would have to buy a sizer. and Bluedot is the powder for buck...

I use a Mec 600JR mark 5, I resize reprime, and use the powder bushing to throw powder, eliminate shot bottle, and crimp lips come down as powder is dumped into shell, then its simple to push a wad...

the more I use my 1oz lee mold the more it gets smoked and lubed and slugs just fall out, start at a higher heat in the first slugs temps come down to 600 when they start dropping, follow lees load...

thanks, I don't want to buy another mold. I listed wrong wad, my load AA/HS hull W209 primer
30 grs HS-6 with 12 .311 balls and a copy of WAA12F114 with petals cut off, THIS load crimps out...

37 or 38 grs of hs-6, I would be afraid of pulling trigger everytime.