I did not get a PM
I tried to PM You
Type: Posts; User: pupsdad
Forum: Completed Deals
I did not get a PM
I tried to PM You
Forum: Completed Deals
101 Winchester fired 45 Win Mag brass.
$33 to your door
Money order, check, PP f&f
I finished it yesterday 17.5 inch barrel 1in 16 twist 45 Raptor I'll post a photo once I get the barrel dura coated
317320
308163
Made a case expander that goes to .455 works well. I'll polish it down to get .452. Now I'm going to cut to 1.8 & turn necks to correct thickness.
45 Raptor it is going to be I decided why...
I am really putting a lot of thought into this and have decided that I think I'm doing standard 45 win mag then if it doesn't do the job I'll ream it to the raptor and just keep the loads light.
45 Raptor is 1.8 inch case so the 1.6 is pushing it a bit but I will most likely be shooting a 320 gr hollow point at around 1500 fps.
I have a barrel sitting on the shelf to make a 45 rifle if they changed the Illinois law allowing rifle for deer. Always thought it would be a 45 win mag well the law changed and they are allowing...
Forum: Completed Deals
326471 215 Gr RN (8MM) I was trying to trade this one no offers I'll sell if your interested.
Forum: Military Rifles
OK I checked every thing out the barrel and action are straight enough for this project. The action is just has a rough finish on the c-ring were the barrel seats. I scraped the barrel channel and...
Forum: Military Rifles
Accuracy has been a problem so far. The barrel is pushing against the left side of the barrel channel . I did notice that the barrel contacts the right side of the c-ring first so I'm hopeful that I...
I'm a 45 guy I like my 45s. But I shot my 8X57 for the first time today and I'm getting set to maybe have a new favorite. I can't comment on the accuracy of my rifle yet but all else seems like I...
Forum: Military Rifles
Anyone got one of those guides that screws in the action to lap the inner c ring and bolt face? How a job do you think it does?
Thanks
Forum: Military Rifles
186032
Loaded up 5 rounds for test firing and that went well, they all went bang and hit close to my aiming point last shot was a bit to the left. The front sight is just cobbled together and held...
Forum: Military Rifles
I need a large ring barrel to make a lap guide to lap bolt face and c-ring let me know and I'll pay a reasonable amount.
Forum: Military Rifles
185345185346185347
Finally warm enough to work in the garage.
I set the barrel in the lathe and set the chamber back half about half a thread I'll set set head space next. I cleaned the work bench...
Forum: Muzzleloading.
There's a Crockett in swapping and selling right now.
Forum: Muzzleloading.
My cousin shoots the Lyman 457122 in his muzzleloader. He has killed several whitetail doing this no sabots just lubed pure lead loads and shoots. Ever try this or seen it done?
Forum: Military Rifles
183337183338183339
Done with all I'm doing before bluing. I'm going to put the metal all together do some test firing. This is a cast boolit only rifle for me and if it shoots decent I'll clean up...
Forum: Military Rifles
182510
Stock work done for now. I'll install the butt pad and fire some test rounds after I finish putting the barreled action together. Then I'm going to start cutting the steel for a bluing tank....
Forum: Military Rifles
Thank you Lags good explanation I do have trouble getting my thoughts out but I hope every one understands were I'm going now.
Forum: Military Rifles
Yes this is the same rifle in the other thread I was wanting to talk about the 8x57 and how it ranks in cast bullet shooting. I should have been more clear.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |