Search:

i know its been a long time but i just measured the pull on mine and its 5.5 lb but feels lighter

323851
This is the toggle I am on about and some reloaders use them to seat bullets in my cylinder . I just need to know which model they use as they come in various sizes … many thanks

Cheers gentlemen for your replies but it’s not the one shown as I already have that … it’s one I’ve seen on YouTube which looks cool .
If you type in horizontal piston toggle lamp it should bring a...

Will be making one form off the gun loading but need some advice … not sure of the model number on the horizontal piston toggle clamp that I need as they are so many and sizes … any advice much...

Recently I started using my 1858 along side my ROA and it started to jam occasionally to which I had to remove the cylinder to free it up …. Not sure if it was because of split caps in action I just...

Cheers, will look on mikes page

currently using tresco on my remington 1858 and seems ok at the minute but i do have a few spare sets of normal nipples in the range box.
anyone tried adapting nipples with the hole in the side mod...

we only shoot from one firing point which is behind the grass etc.....occasionally we might fire a few rounds at 10 and 25 yards from the targets for zeroing in after bore scopin

the area is 100 yds long and 20 yds wide
cannot burn it as its the gun club property lol
will see if i can hire a detector

not a bad idea.......

i emailed them ......sure i asked before bur worth trying again lol
many many thanks
happy safe shooting

hi gentlemen
not sure if this is the right place to ask so mods please remove if not applicable.
i have a beautiful verguiero 1904/39 in 8x57 and stupidly i lost the front sight protector.
i...

depends on the model you have as to rim thickness.
i would measure the recess at the rear cylinder which is .40 thou on mine.
find a tight fitting plastic / wood / delrin rod which fits snuggly in...

just been given a tub of this and wondered could i use it as a filler instead of cow?
revolver is a pietta 1858 which i usually use 20gns swiss 3fg and 12 gns cow and .454 ball

many thanks.....i found it just before you posted.

just says cineshot 30-06
was told its rws brass with a non lead bullet seated etc

just got some which were cheap once fired to turn into 8mm mauser.
just wanted to know who makes it ?
been told its rws ,,,,,
then someone tells me its romania ,,

oiled it and left a few days and the pin drifted out.....many thanks

yes it is that rifle.....tried to punch the pin out but it doesnt move so i thought i ask more learned ones.
it may be just stuck so i will soak the pin with oil etc and try again
many thanks

anyone know how to remove so i can try out a pistol scope for a quick plink
it doesnt seem easy like a k98

just bought another one very cheap.....
first one i had to piggy back weld 2 shell holders together as i didnt have enough ram travel for my big martini henry dies.
top of the frame seems to be...

thats the site i checked.....if they are ndfs dies it would make sense as i am in the uk and they were from an old gentlemen and i presume rcbs dies are hard to come by over here esp special order

you might have hit the nail on the head.....NDFS dies

it is , but i cannot find any info on this

hoping they are 11mm mauser / 43 spanish as thats what the mold is for.
hopefully they be here in a few days