Ever try to do this to make hollow point bullets ?
If so,any tips on how to do it !
Type: Posts; User: Willyp
Forum: Cast Boolits
Ever try to do this to make hollow point bullets ?
If so,any tips on how to do it !
Forum: Hunting with CB's
Doc, actually i was looking to buy some bullet from some one on here !
Forum: Hunting with CB's
Any of you folks have a mould that cast this type of bullet in a 240 t0 250 grain ?
I am looking for a cast bullet similar to the slug that comes with the Cheap shot sobot .
Forum: Muzzleloading.
Thank all of you fro responding.
As to the Traditions part, i have 2 of them here and the frizzen is a lot bigger than the CVA.
This CVA is from the mid "1990s". I have no idea what it was called....
Forum: Muzzleloading.
I can't find a Frizzen [mine is broke] and a flash hole liner for it !
Any one have any of these parts ?
Forum: Reloading Equipment
Well i am going to put them in the scrap bucket for the recycle place.
I have a pile of factory scope covers that come with the scopes in the boxes.
The elastic cord that holds them on just dies after about a year just setting in the gun cabinet????
Does any one have...
Forum: Reloading Equipment
Has any one here bought or tried one of these Chronys?
Forum: Muzzleloading.
Will this mold work for my in lines? I have a pile of sabots for 45 caliper bullets in a 50 caliper in lines.
I have lots of pure lead to cast them with also.
#1-Why are you supposed to set the chrono up 10 feet from the end of the barrel ?
#2- How do you set it up to be sure you will not hit it with the first shot from your gun ?
Any and all ideas for...
What do you use to oil your bolt action rifles or shot gun actions?
I seem to remember my Pap using 3 in 1 oil.
Why are bullets for a 45 caliper rifle .458 but for a 45 caliper hand gun they are .452 ?
No one seems to no the reason!
Forum: Muzzleloading.
BUBBA,you jogged my memory and now i do recall that LLA will gum up a muzzle loader!!!!!!!!
Won't be trying it at all!
Forum: Muzzleloading.
How would this stuff work with Maxi-balls or Lee Real Bullets in a Flint Lock rifle,50 caliper and black powder?
Forum: Factory & Surplus Powder
I bought it ,back then,to use in 308 and 30-06 with 150 or 165 grain jacketed bullets.
I have since moved and lost the load sheet that was sent with it. I bought it from Jeff Bartlett back when it...
Forum: Factory & Surplus Powder
I got an 8 pound jug of this at lest 15 years ago and it has set on a shelf!
Would it be good yet ? It has been inside and jug is half full.
If it is usable ,i don't have the recommended load sheet...
Forum: Casting Equipment
And if you are using pure lead. No one said anything about that. If you get them too hard they will be tough to get down the bore. Been there and tried it!!!!!!!
Forum: Factory Rifles
How true. Savage,Ruger,Mossberg and Remington seem to have a model that are easy to buy. The thing is they all shoot better than you would ever expect. I bought a Savage Axis,in 30-06,just to shoot...
Forum: Muzzleloading.
Thank you for the offer,Fergson,but it just would be easier for me to get another mold,the 250 one.It is due to get pretty cold here,soon,so my casting and shooting will be over soon. I will have to...
Forum: Muzzleloading.
Motor,Maybe i need to try 250 Reals? I had the mold and sold the darn thing!!!!!!
Forum: Muzzleloading.
I shot 20 of them,[320 grain]with 2f Goex and Borebutter plus a wonder lubed bore button. I used different powder loads,going up in weight, and did no better!
These were 320 grain,pure lead,out of...
Forum: Muzzleloading.
I have a bunch of short starters and they fit the bullet shape,for starting,well. The last band is,for me,is tough to get into the bore,past the or down the rifling. I am not the guy i was 40 or 50...
Forum: Special Projects
I have cast a pile of these 2 conicals and thought i would like to hollow point them?
There is a little flat spot on the tip of both type of casting. So,how would i find the center,to drill out a...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |