Search:

try sage outdoors, they have them

I had a falling out with my Lyman 4500 and decided to try something different. I took a piece of White Label carnuba blue and melted it on my hotplate. Added about a tablespoon of STP and a little...

Good job, lots of good eating there.

I took it about 5 years ago. Instructor was retired DNR officer and competition shooter, very thorough instructor. We shot a lot of ammo up. Qualification was a 10 shot, 6 inch group at 15 yards,...

Lee data for a 158 grain starts at 6.2 and goes to 7.8 I have not tried this yet, so do not know how well it works.

That's two of us Paul. And I like being me.

You did well John, nothing better than organic bacon!

Good job, and he learned patience is required to succeed.

Conners was 6 foot 7 inches tall, he was a former professional basketball player for the New York Knicks and also a baseball player, first base man, for the Chicago Cubs.

Don't try to use wad cutter cases, they are too long for a 38. Don't ask how I know that.

This very well could have come from a submachine gun, the SWAT guys use H&K 40 cal.

Did not know where to post this, so I started here. I pick up brass from the sheriff dept range and I found some strange brass. Head stamp is Speer, 40 S&W, but there are markings on the outside...

Well I did not have any luck, when ran through the sizer, it cuts at the lube grooves and the paper is now in 5 sections. But it may work with a Lee TL design or a smooth side design.

Before I try, I was wondering if anyone had tried Reynolds Wrap Waxed Paper? Seems it should work well to me.

My M-92 Rossi must be loaded with 38 spec cases with the Lee 358-200. I use 38-44 load data in mine.

I use 12.9 gr IMR 4227, recoil is less than full house 357 mag 158 gr.

Thanks for the test and your info #40Fan, at least you tested something instead of reading about something before making comments. You are on the right track, test it, record it, do it. In your...

I could be totally off base, but what about the brass .410 shells? I have never used them and have never measured them, but the rim should work, I think.

Does anyone know the bore size of the 44 mag, I would assume std rifle size, and the twist rate? I have held, drooled over and fondled the .223 and am waiting to see the 44 mag.

Large rifle primers are taller than large pistol you should be able to sort them out.

Problem is too many think they can buy that ability.

Man, that's a big 10-4

Wow, that is Impressive. Are these available?

I tried the gas check in the lube groove trick that Larry brought up. He was spot on, I now can cast wad cutters for my worn 303 British. As usual Larry was on track and helpful. I now have a mold...

Just ordered the Sage Outdoors 303 checks, thanks for the info and the link. Cold here today, first warmer day I will pc a handful of boolits and try these.

I am using copper checks I bought on this site from Blammer. I am installing them with Lyman 4500 with a .315 sizer. On my checks they fit very tight. I lay the check down on bench, open side up...

I am new to pc, have purchased powder and spray outfit, but not tried yet. On a cast Lee 312-185-2r gc for use in 303 Brit, do I install gc then powder coat or pc first then gc. My mold has been...