Search:

Couple questions on the post above. 1. Why not 2 cycle oil for outboards? 2. Why synthetic, other than a lot more expensive?

SW Iowa has a lot of large farms and rolling hills. Most of the time if you just ask the farmer will let you shoot if it is a safe area to begin with. I can shoot right outside by back door as it...

I must have done something wrong as the fix didn't work for me. It shows up in the add-ons manager but still cannot see the photos. Using Firefox.

Thanks much jeepyi. Nice manual, now to figure out how to print it out in booklet form ? ? I did find that the parts are all there for my 45. I put a hair dryer up against the lube tube and...

Thank for the info earlmck. I used to have a 4500 many moon ago but forgot just how they worked. This one is full of dried up lube so I think the first step would be a hair dryer on the tube and...

I have a 45 I plan to use mainly for sizing. It is tight with no excess play in the rods, etc. Sizing works great so far. I want to clean it up and get rid of the old lube. The cap to the lube...

I screen 3/4" road stone through 1/2" hardware cloth for my garden railroad. I lay the screen, 2X3' tapered to 10" on one open end over a wheel borrow and add the rock slowly. Fines all fall...

Didn't do a very good job of explaining what I was after did I. Knight .50 cal muzzle loader. Knight Rifles advised a good target shooting bullet would be a .458 cast bullet between 240 and 300 g...

Started to clean up an old Lyman 45 Lub/Sizer. Old dried out lube from not being used in many years I am sure.

Trying to get a .459 mold in the 240 to 300g range. Mostly for fun type shooting. Only mold I can come up with is a 400 or 405 g bullet. I can size the .459 down to the .458 to use in a sabot. ...