Search:

Wondering to know your Kaido Conical bullet actual size. My lyman RB 375 mold drop .376 by pure lead air cooled. Just fit on burrel groove diameter but not large enough to stay in cylinder mouth, I...

AR9 with CMMG deleyed blowback 5 inch barrel.
Sofar I got most accurate cast load from RCBS 9mm-124gr FN mold.
COWW plus 2% tin, water quenched BHN 11.4
Powder coat; harbor freight red
Powder...

240009
Would like to share my practice & plinking back yard air pistol with folks. Cheap conversion and minimum require accuracy you could get from standerd pellet pistol sold in US.
This is not...

Got two AR.s both 1-8 twist 16" and 10.5" pistol gas tube length.

Lee C312-155-2R with GC size .310 and or .311 COWW water quench
2400 @ 10.6 gr (10.8 gr for cold weather condition) 3MOA
W296 /...

My Two Arisaka Type 99s are good shoot at 100 yard few MOA. Lee C312-155-2R with 16.0gr to 16.5gr Allient 2400, not require Dacron filler this powder, GC should use for accuracy. I also have Lyman...

Several online resouce are available, if you not looking for 100% original parts, reproduction for replacement.
One of example link; http://cfnparts.com/index.php?route=product/category&path=824...

You should pay extra attension, if use 4198 for reduce load with under 130gr boolit, such as under 14.0gr powder charge. may couse remain unburn powder in the barrel, 4198 burning speed is much...

Try to built AR upper specially shoot for cast load, mainly 100 yard target shooting use optical sighting, shoot from bench rest.
Accuracy goal will be 2 MOA or better and semi auto loading should...

I would like to share some of my experience here, under several different powder charge with Arisaka Type99s.

I have two different production of Arisaka type 99 currently and I shoot both in past...

In front of your serial number is, " ム" pronounced " MU"
Just follow my post.

Shiori
　

Regarding identify Arisaka Rifle & Bayonet, see link below;

http://www.radix.net/~bbrown/japanese_markings.html

I own two Arisaka type 99 early production and several "Type 30" bayonets.
At...

Just let you guy's know about several difference of 7.7x58 Jap ammo.
Either rimed one or non rimed 7.7x58 loaded for Type 92 heavy machine gun or Type 98 Light machine gun. (some of them for Type 97...

Folks

Regarding safety knob, I agree and never use at all in the shooting range.
Because original military spec trigger has no issue to safety on at this pupose.

However, if you like to...

Thanks for reply my post; MtGun44, Three44s and Sean.

I use to be a revolver shooter, which PPC compatiotion match.
Figure out true shooting method in US, learn a lot through handgun serious...

I got my Arisaka Type99 about same price in several weeks ago at local gun show, but without bayonet.
I'm living in California and $200 is reasonable price around this area.

Most of west coast...

Mr. Gibson.
Appliciate your reply on my last post.
I saw many of your post on other article in this forum and all of them are respectfull, because those are ture experienced base posts.

Like you...

Newtire, thanks for reply my post, I went through that website already.
I was try to get Lyman 311316, 311576 and 313631 and did not sucess, end up got 311419.
However, point of discussion of my...

Yes, I have a Star sizer.
If I got this right, I need to size my 7.62X39's and my 7.7's at .313 and my '30-'06 at .309?
It would be nice to have one mold for the '06 and 7.7, it seems I'd want a...

My IBM M1 Carbine has 0.3095 grove dia. found by slagging.
When MV exceed 1200 fps or above that differntry turn to keyhole at 25 yard by Lyman 311410 (130gr, RN cast by W-W) even lube & size to...