Four cavity gas check-- one please. ward DoT olson AT yahoo dot com
Thank you
Ward O
Type: Posts; User: WARD O
Forum: Group Buy Archives
Four cavity gas check-- one please. ward DoT olson AT yahoo dot com
Thank you
Ward O
Forum: Group Buy Archives
I have been looking for one like this for quite a long time with 4 old rifles in 38-40. I use real soft alloy with black powder for a couple of these rifles ..... 401 might be a little on the small...
I picked up a batch of those many years ago.... seems to me I shot them up in my hornet rifles.
Forum: Vintage Ammo
I shoot a HiWall in 40-82 and ran into a similar problem. Gun was originally intended for black powder and relied on the obturation to get the bullet to fill the bore. In my rifle, if I use a...
Forum: Group Buy Archives
The problem due to the transposition of numbers is that the forward driving band is too narrow and does not match the original drawing.
Forum: Group Buy Archives
Interesting. It would likely be a very good general use 32 Ruger bullet. But it seems a little bit lite.... In the 45 wasn't it about 325 grains - heavy for caliber. At 105 this wouldn't be...
Forum: Group Buy Archives
My you're fast today.... I corrected the original post.
Forum: Group Buy Archives
I will try two please.
bill me at - ward dOT olson at yahoo DOt com
my 650 sees a lot of use so having a couple to play with sounds good to me.
thanks
Forum: Group Buy Archives
JAC43 - Don't worry about it..... Miha is first rate and everything he says will happen! If you need some bullets, make some with the mould you've received - they will be first rate and shoot very...
Forum: Cookin' Recipe's
Be happy the 'religion of peace' won't eat pork or that deal would be gone, gone, gone....
Forum: Group Buy Archives
I purchased two moulds, a six cav aluminum and a two cav brass. Please add me to the list as well.
Thanks for the going the extra distance here to make things the best?
That's why I have so...
Forum: Group Buy Archives
I am still interested in this mould. My cartridge OAL is only limited by magazine length and I believe it to be somewhat generous. 140 grain suits me fine. 7.62x39 case neck is about .235 and the...
Accurate Moulds. Call him up and tell him what you are looking for and he will likely build it exactly.
http://www.accuratemolds.com/index.php
Forum: Group Buy Archives
Could be fun! I shoot a bit of PP and another mould depending on design would be welcome.
Remember now that with PP the mould diameter with a specific alloy needs to be pretty much spot on as...
Forum: Group Buy Archives
Looking back in post 16 Miha mentioned he was experimenting with this bullet. I had hoped it would lead to him offering some insight as to a rerun or revision of this mould. I would like to buy one...
Forum: Group Buy Archives
While my 6 cav aluminum seems to shoot pretty good on first attempt I too was a little concerned with the smaller than expected front drive band. I was also a little surprised at the reduced...
Forum: Group Buy Archives
Let's keep this one current so it will hopefully get some attention from Miha.....
Forum: Group Buy Archives
I'm thinking not more than .314 as it will be for use in my CZ 7.62x39 and I feel .316 is too big to expect this pointy HP to size down well. Sometimes Miha's moulds cast out just a tiny bit big...
Forum: Group Buy Archives
Perhaps it would be a good idea to wait for word from Miha..... Let's see what he has to say.
ward
Forum: Group Buy Archives
Can someone direct me to the thread where it is explained how to determine the throat size of the rifle to determine proper bullet diameter for your rifle??
thanks
ward
Forum: Group Buy Archives
I second this. My CZ has been ordered.
Forum: Group Buy Archives
I would think that 155 might be a little better balance but I could be interested in this either weigh (way.) Heh Heh... I would have to pass on one without lube groove though.
ward
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |