these hp bullets only cost a little time .How much are they at the store or online with shipping .Hate to spend unnecessary money.
Type: Posts; User: savage99f
Forum: Cast Boolits
these hp bullets only cost a little time .How much are they at the store or online with shipping .Hate to spend unnecessary money.
Forum: Cast Boolits
Yes with the steel .not so much with the aluminum .back the bit out often to clear the hole
Forum: Cast Boolits
I have made several hollow point jigs to turn regular bullets into hollow points.
They work very well.Here is a youtube link if it works ..thanks for looking...
Forum: Cast Boolits
you will run out of lead before you run out of powder ha ha ha
Forum: Cast Boolits
I have 452488 and I just loaded 5 gr of tightgroup .Had to set the bullet deep in brass to get it to go all the way in to the chamber.Overall length is 1.125.Will test in the next few days .Click...
Forum: Cast Boolits
bullet drops at aprox 200 gr with wheel weight lead .Coated with hi-tek
Forum: Cast Boolits
I have 452488 and I just loaded 5 gr of tightgroup .Had to set the bullet deep in brass to get it to go all the way in to the chamber.Overall length is 1.125.Will test in the next few days .251657
I...
Forum: Coatings and Alternatives
Have a Beretta 81BB and I just loaded 77 gr ww and 81 gr pure lead .I will be shooting in a few days .I have the lyman 311252 mold .I am looking for load data for 32 acp .Also which bullet is best...
I just got a forester co-ax priming tool and it is fantastic
http://www.forsterproducts.com/catalog.asp?prodid=700679
I have used the lee and several press mounted ones and this Forster beats them...
Forum: Swaging
I got these with some reloading stuff ..Not sure what they are .I saw some swaging stuff and they look similar 148801148802148803148804
Forum: Reloading Equipment
I just got a REDDING POWDER & BULLET SCALE MODEL #1 .This is the one without the adjusting nuts on the end of the beam....Does any one have an instruction sheet for this model ..Thanks Pat.....if you...
Forum: Casting Equipment
I have a lee 44 cal mould 710667106771068
I would like to trade for a lighter 44 cal mould ..this one is 310 gr and I would like to trade for a mould under 200 gr in 44 cal .429 or .430....or a 7 mm...
Forum: Lead and Lead Alloys
If I have a batch that is a little damp looking it all goes in a cold pot and a low flame the moisture evaporates before the lead starts to melt..If you had an old oven it would be a good pre heat...
Forum: Our Town
I have tried to get this program to work on my machine and have had no luck...I have office 2003 (maybe that is to old? ) I tried installing saying I had no Access and I tried to install saying I...
the 58 has an adjustable vent at the front of the fore grip ..if you are using HOT shells turn it to vent 3 holes light shells vent i hole ..use a flashlight to see how many holes are open ....Pat
Forum: Cast Boolits
It pours a nice boolit of 150 gr plain base
Forum: Cast Boolits
Yes it would ..I would like to trade it for a .310 gas check as I dont have any 32 cal
Forum: Cast Boolits
I have sized to .3095 with a gas check and tried 30 shots in the 03a3 with no leading ..34 gr 4198 with a 180 gr boolit GC....I shot offhand at 50 yards and the group was 2 " ...I dont have a...
Forum: Cast Boolits
the lyman mold I have 31114 is probably for a 32-40 as it is close to .313 or a bit bigger ...a bit large to size down for 30 cal as there would be hardly any grooves left ...the lee molds are .309...
Forum: Cast Boolits
oh by the way (char gar ) I have 250 boolits with gas checks that are .309 ...I have loaded a few and will try them ...I also have another 1000 checks comming ..probably will need to get a new mold...
Forum: Cast Boolits
I have a .308 sizer comming and will widen it to .310...seems that lee does not make a .310...every where I check there is .308 .309 .311 even on the Lee site...any way it is easy enough to widen...
Forum: Cast Boolits
I will try that this weekend and let you know ...thanks for your help ...you guys are very helpful Pat
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |