Search:

I finally got to try some out with Win. 231. Slightly less than 1 inch groups
at 15 yards shooting off the back of an old chair. Cuts a nice round hole
in the paper - probably from the slight...

Thanks - I have the Lyman 46th & 48th & might get the 49th.
I found a can of Herco & wonder how it'll do in the 9mm ?
Bullets came from G. Patton in Georgia & are very high quality.
...

Thanks for all the answers. I have several reloading manuals but no data on the 135gr.
I was interested in trying to duplicate the Hornady Critical Duty Plus P load at about 1110 fps.
Wonder if...

I recently came across some .358 diameter 135gr. castings with a flat nose
that are about .585 in length with a meplat of about .25.
There seems to be very little data for the 135 grain....

Was wondering about the best way to add a small amount of tin
to straight wheel weights for a 452460 mold for the .45acp ?
I'm just trying a few wweigths to start off with a small batch of
about...

Has anyone tried using the Paco tool on any of the CCI CB short or long
ammunition to make them a little more accurate ?


Thanks

Yeah the model 60 is a Great carry gun when hiking or out in the mountains
cutting firewood. I don't shoot a steady diet of those loads and I have a 2 1/8 in
model also. I have a couple of...

I tested a few 180gr NOE WFN with a pretty good dose of 2400 in a
Smith & Wesson model 60 3 inch barrel with CCI 500 regular primers.
The accuracy was Great running from 3/4 inch to 1 1/4...

Anyone know what the difference between a CZ 527 Classic & the CZ
American are ?


Thanks

Is Smith & Wesson the only manufacturer to make a revolver for the
.50 S&W cartridge ?

Thanks

Mine are about .357 and they did Great in about all of my .357 Revolvers
with 15-15.5 gr of IMR 4227.
That may be a pretty warm load, but I got no pressure signs at all and was
shooting...

Thanks for the pictures --- It looks Great.
I've heard Dave Clements does a Super job on his work.

Accuracy was Great in Ruger 4 5/8 inch barrel with W 296---1 1/4 inch groups
at 15-20 yards.
Had to change the rear sight blade to get it to shoot point of aim as it was
about 3 inches...

Any idea what the meplat is on the Lee 90322 mold ?


Thanks

Anybody tried the Lee # 90322 mold. It's a 158 SWC - GC.
About what weight is it dropping with w.weights and is it more accurate
than the Ideal 358429 or Lee 158 RF in most .357 S&W &...

Hey Run 5,

Thanks Very Much for the answer. That's pretty much what I expected
about them. I sold some of them several years ago in my store and
never had a complaint about...

Anyone know what the main difference is in the Rossi model 713 & the Rossi
model 971 in .357 Magnum ?
Are these guns pretty decent, accurate,& dependable ?
I don't mean for a steady diet...

Thanks for all the answers-it's probably a mis-print & is a 410610.

Anyone know what weight & design the Lyman 410510 mold makes ?


Thanks

A friend of mine told me that S&W had brought out a new light weight frame
automatic that is like a Glock and sells for about $250. I could hardly believe it
& looked on the S&W site and...

Has anyone ordered one of the S&W model 64 .38 Special revolvers from J&G
Sales ? They're supposed to be double action only.
Was wondering if the "bobbed" hammer was changed if they can be...

By the way ---All the rounds listed above are from Handguns Only.
I use a fairly thick cardboard target backing to help stop pieces of
jacketed bullets from coming back through. I rarely...

Several years ago I took an Outer's .22 bullet trap & had a friend weld a metal
plate to the back of it. For a long time I used it outside to shoot in the back yard
with .22 LR, .22 Magnum &...

While it's not the exact same boolit---I'm shooting 14.8 & 15 gr of W 296 and
the Excellent NOE .360-180 in a few of my .357 Magnums with superb accuracy
& power. It's dropping from the mold...

Hey Papa Smurf,

I meant to ask if you could measure the length of the cylinder on your
revolver and I'll compare it with the 7 .357's that I already have.
All of mine are 4...