Search:

Haven't used a sizer, Right from the mold and results are very promising. 2" at 50 YDS and 6" at 100, 80gn 777 2f. lubed with 50/50 Beesawx and crisco finger lubed with some in the large groove....

I posted this in the cast boolet forum but got no answer so I;ll try here.

I recently purchased a CVA Wolf with a 28 twist and a Lyman 504617 mold and need to know if I should lube just the lower...

I recently purchased a CVA Wolf with a 28 twist and a Lyman 504617 mold and need to know if I should lube just the lower lube groove or both the lower & upper larger groove.
Seem's like it would be...

$2.99.9 a gal heer, $2.74.9 a month ago-SUCKS

Well a deal came up i could not pass on, Marlin 336SS 30-30 less than 50 rds for $300

From what i have read so far it's 10 twist with micro groove but i'm not sure how i should size my saeco 315...

I bought a used Saeco 307 mold and it's casting a parting line that measures .308x315 on the parting line.

I assume the alighnment pins need to be adjusted but I'm not sure.

How would you go...

Tikka T3 hunter with a Saeco 315, 21.8 grn of enforcer, WLR seated to the lands gives me 1850 FPS and 1 MOA at 100 yrds.
Drops 12" to 14" at 200 yrds.

I'm just starting to increase the charges to...

I started loading for a Glock 22, 40 s&w and i have cases that wont fit the throat in a KKM barrel.

Will a Lee bulge buster help with my problem to get those cases to fit and if so can i size them...

My Father and Brothers, and Peace of Mind.

I Miss you all so much

God I wish I would have read this 2 weeks ago :groner:

Sure, Bring em over as I have a couple to do also.
I'm in NE Or.

Well another question on BP lube.

I have the ingredients to make Bees wax and Crisco but have no idea of what percent to use, can anyone help me out ?

Thanks, Steve

Thanks for all the info,
I have some bens red to lube with but no sizer yet. How do you lube a mini in the sizer with a conacal base without damaging it ? Nose first ?

I think the twist is 1-68...

Only been muzzle loading for a few weeks and only with round balls.

Elk season has been open for 3 weeks now and I have not been at ease with the 175gn round ball so i picked up a Lee mini ball...

They now have 1000 less

So did you get it ?

:awesome::awesome::awesome::awesome:

Second to none customer service, They have been very good to me also

I would invite him to your place of reloading or to his to teach, show, him how it should be done correctly, and tell him you will not shoot with him again until he dose.

Your's and anybody's else...

I have an unlimited supply of ammo

Thanks Blammer,

I have been casting for a few years for my 9mm, 40, 357 rifle, and 45 acp & colt with very good results but not for the 308.

I know that the 311365 is not a good choice for...

Not a friggen clue

I have 50 311365, sized .311, checked and lubed with Ben's red, and want to load and shoot these from my Tika T-3 hunter 1-12 twist, to see if they work. I have fire formed brass that they will fit...

I have gained so much here and it's a very good feeling to help others, Thanks for your gift,

Steve

Carb Kit for that engine is a # 394693, still a good #. The float # 99333 , The float may have a hole in it not allowing to seal the to seat.

You will need to remove the adjustment jet under the...