I run the same bullet in my 336 35Rem. Cast from WW and gas checked. I let them cool first then run through sizing die .358" to set GCs and lube. Brass trim length is 1.911", I use a LEE trimer set...
Type: Posts; User: GuzziRider
I run the same bullet in my 336 35Rem. Cast from WW and gas checked. I let them cool first then run through sizing die .358" to set GCs and lube. Brass trim length is 1.911", I use a LEE trimer set...
Forum: Black Powder Cartridge
Good advice Don. I have used the 645 with good results for years out at Alliance, NE.
Forum: Black Powder Cartridge
Want to have a real interesting experience? Try sending a C. Sharps back to them in an MVA box! I did it with out thinking as the MVA box I had on hand was wood and I reasoned it would be safer....
Forum: CB Loads / Military Rifles
I slugged the bore yesterday and it ran .3145-.315". There is some pretty good wear but the rifle still shot well at least with factory loaded PPU FMJ at 75 yards. (pic below) Worth at least trying...
Forum: CB Loads / Military Rifles
Thanks Gents,
Just the input I was looking for. I was pretty sure that this would be the place to save some time and get headed in the right direction on this project.
Forum: CB Loads / Military Rifles
I picked up this rifle in 7.65x53 Argentine a few weeks ago. I have bought and fired PPU 174 grain FMJ factory ammo in it with good results. However this is both expensive and hard on the shoulder...
Forum: Black Powder Cartridge
My C. Sharps was my first BPCR way back when. Its a 45-110 SS. I have put many rounds down range with her over the years. I now have others form various makers and in different calibers. I have...
Forum: Black Powder Cartridge
One thing you might try would be in a case as large as the 45-90 would be to use 1F granulation. In my 45-110 this makes for a good target load for competition work. With 2F loads the 110 is a bear...
Forum: Black Powder Cartridge
I went to SPG years ago for both BP and Smokless cast loads. Its a good lube and easy to obtain. If you buy it in bulk its reasonably priced to use. For me its not worth the hassel to make my own. If...
Forum: Factory & Surplus Powder
I started a project last year to find a direct cross over from black powder to smokless in my 45-70 Rolling Block. Not all of the long range buffalo type matches I shoot forbid the use of smokless....
Forum: Black Powder Cartridge
Hi M-Tecs,
Long time 45-110 shooter here. I recomend the 1f in any brand you choose. It works best in the long case. I use Goex myself and have tried the Swiss but couldn't see enough diffrence to...
Forum: CB Loads / Military Rifles
Another good sight ready made for the Mosin is the Mo-Jo. I have a set on one of my rifles. Adjustable for both windage and elevation to any range with any ammo. Easy to install. Also have...
Forum: Factory Rifles
Hi All,
My grandaughter and I went retro this year. Her shooting a Remington Model 722 (1950's manufacture) and me a Remington M81 (1947) both in .300 Savage. We took four deer between the two of...
Forum: Black Powder Cartridge
Congrats Don,
Let me see. From the looks of that tang sight I am thinking this rifle might be seen out on the western plains of Nebraska this next year.;)
Forum: Black Powder Cartridge
Hi,
You have already recieved some very good advice on bullets for the longer range shoots. The only other thing I would add is that when you start getting out past 500 yards even with a good heavy...
Forum: Factory & Surplus Powder
I have found that WC872 can be sucessfully used as a smokless alternitive to my standard Black Powder load in my 45-70 rolling block. Using the same bullet I like for long range work with this rifle,...
Forum: Black Powder Cartridge
Give it a go and see if it works. Then adjust as needed. I know a fella that shoots nothing but wheel weights and has won many a match in all kinds of BPCR events.
Forum: Gunsmithing Tips & Tricks
Hi Roysha,
I have an 81 in 300 Savage as well. I was having trouble with feeding and the mag floor plate kept poping out but only after the mag box was removed from the gun. Turned out the mag...
What was the style of your 540 grain cast? Plain base or gas checked and what alloy? I am looking for a smokless load to use in my Roller in 45/70. I commonly shoot BP in it but there are times I...
Forum: Factory & Surplus Powder
Hey Freightman,
I am looking at trying to use WC872 to work up a load for my Roller in 45-70. I am shooting a 545 grain cast boolit with 72 grains of compressed Swiss black powder right now. This is...
Forum: Black Powder Cartridge
Just a thought to pass along. I have had Lyman moulds in the past, 457125 was one of them, that were out of spec. The one I had cast a .004" undersized nose. Not ever going to get that one to shoot...
Forum: Factory Rifles
Hello,
I am getting an old Remington Model 81 Woodsmaster in .30 Rem up and running again. Its in good shape for a rifle that was built the same year I was born! I am looking for anyone who has done...
Forum: Black Powder Cartridge
Hey saz,
In all honesty save your bucks and pick up the MVA's. Other good choices are Red River(the old PU brand), Kelly and Baldwin. You can check them out at Buffalo Arms web site. I have been...
Forum: Hunting with CB's
Hello All,
This list seems to be a good place to get some well informed opinions on cast bullet hunting. My interest is in what those who care to comment feel the load pictured below would work on...
Forum: Black Powder Cartridge
I have done a lot of experimenting with my 45 2-7/8 over the twenty years I have had it and Goex F is my powder of choice still for both hunting and target work. I long ago went to Swiss in my 45-70...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |