Search:

BIG lots did have pet toe nail clippers for about $1 they work good . they are small and get the sprut cut close. One guy said Harbor Freight has a reverse angle side cutter. I looked but didnt...

hone it I do it to ALL molds. Make sure its very fine FLAT stone

most times the light rust will come off in an over night soak in "Coke" that is the soft drink dont leave more than over night and wash well and oil for a day then clean to cast. OR best is...

check guy on feebay listed today
lookunder reloading new listing he has a 12 ga but can make anything you want
I have a couple he made and they are good

anyone want some?
be sure to watch the hulls you load
they dont work in the hulls that have the base liner . like the newer win AA and Rem gold

rda
you have to mix the powder so it works . They shoot better, also the powder helps clean the inside of the cases

Kroil

Well I missed the AB
Ok I understand now .
Cut the top of the shell off. you dont need that part. Next you need a filler for base of slug. I would use wax. next If you can get bee wax{guys...

you may get a Big surprise using pistol primers in a M1 carbine. that is a free float firing pin.

you didnt clean the oil off the mold first. need to make sure that ALL the oli is off a new mold . THEN use the Kroil. if you cast with a new mold not cleaned you have a BIG problem. it takes a...

win 37? You may want another gun. It will let you know, they dont like to be shot just looked at.Thats why most have a split pistol grip.
As for loading a MEC 600 with adjustable charge bar. ...

they work on Jeff Tanners molds. OR some of his .

ww has arsenic in it that is like the surfactant to make the shot round . lead and rest wont work.
as for washing you need to get all the water type coolet off. and then make sure you coat with...

the CZ seems to have a deep rifling from looking at a guys at range . He had some federal game loads and some cheap import stuff and both shot good .. I dont know what bore size was but the import...

you been out in the sun too long. PP on a 460??? get you a 32

blammer has the best thats why they are called GATOR s

for pistol the lee molds drop close enough. and as for making alloy harder /shoot what you have first. they will do fine . The hard stuff is for the guys that want to shoot a 3000fps out of a 38 spl

you all better READ the rules. I said READ them Try the {self bull} it is not self . a but you try it let us know . best just ship it usps and take your chance. send all the reloading stuff...

when you get it Before you put lead in take some sand {anykind} and spin the drop pin to set it . then wash it out .
next find a weight that will weigh about 4oz and fit it on the lift handle...

do they chamber? they are pain to reload . most cast dont work and have to have straight side and no check . I give up

one that has not been mentioned is the250 Guy bought it and didnt want it . Its a nice light saw . It has 18in bar and they use a different pitch chain. It will cut with anything out there. I like...

the atf is as good as any But use the Type F its a bit thicker and dont run off and it also is made for higher heat. If you want it thinner hit with Kroil
We use the type F in place of the pipe...

the teflon was what winchester used in the first plactic shells . the MarkV
If you are looking for something to make thin wads the drink coasters that is used in bars. work good for over shot or...

there is 2 different base wads. so load data is not same and wads are not going to work same
the green has no base wad it even with the primer,the black has a curved fiber that primer is just ...

looks like ejection issue. most autos will ding the brass but a hot load will do more. I dont have load book here but that seems a bit hot for cast. as said I dont have load book. remember the...