Search:

mine likes boolits sized at .270

Got my tempilaq today. painted 6 pcs. Ran thru and adjusted till i got the right cycle on my annealer. Turns out my speed needs to be set at 60.

I tried to get it red hot to see if i could. 10 seconds with the center blue flame almost touching the neck and shoulder junction, never saw a glow. ordered some tempilaq.

This is the one i bought. https://www.lowes.com/pd/BernzOmatic-Soldering-Propane-Torch-Kit-14-1-oz/5014236237

I did that. I am in the basement so real easy to get dark. I deliberately slowed it down to get a piece red hot and couldn't get it to glow.

I built an annealler and it seems to function fine. The problem i am having is i can't get the brass neck to glow. I am using a brand new propane flame pencil torch and have gone from almost stopped...

Anybody else get this. When i try to use the search feature this pops up at the top of the screen, This form will be sent in a way that is not secure. Are you sure you want to send it?

My 303 british has a .316 throat. Have you slugged your barrel yet. Seeing that Powder is so expensive now. You might want to leave your PC boolits as cast and coated.

Nice, love the old lever guns.

Great, Thought i read something about the cut ring.

I am making 7.62x40 brass from LC 223 for ar15. The specs call for a neck length no longer than 1.570. i measured the throat using a sized case. Cut most of the neck off. Then cut another small...

How bout this. https://noebulletmolds.com/site/shop/308-311/309-146-sp-h2/309-146-sp-h2-5-cavity-gc

I hear you can put them in shotgun shells when shtf

Anybody use these FM Products Premium Match Grade nickel boron 2 Stage Competition AR-15 Trigger Group $75.00

Measure the inside neck of a fired cartridge, that should get you close.

Brazillian 1908 throat .288

I used a file on the bottom of the handles so mold would sit on factory flat side of handles. Worked fine

I know it's over kill. Braces every foot 241071 First build. Wanted to make sure it lasts a long time. I plan on adding a 3rd post leg, front and rear. dead center

I have a rock chucker as my main press. And i also have a lyman 6 hole turret press. I use the turret for a Lee uni decapping die and a Lee expander die. The other 4 are for various neck belling...

240965progress so far. 240964240962240963

I am also doing 3/4x2x8. Question about the glue and screw. What glue do you all use, and how far apart are you placing the screws

I am also wanting to scope my 91/30. Has anyone used a https://jmeckscopemounts.com Thinking i might go with this setup.

Gamsek, What mold is the last pic, And what weight. The three shiny HP ones.

I like this 1 http://noebulletmolds.com/NV/index.php?cPath=27_182

Measure the inside neck of your fired cases. That will tell you how big the neck opens. You want a lead boolit about that size. My Brazilian 1908 7mm uses a boolit sized to .288 to fill the throat.