Search:

https://uploads.tapatalk-cdn.com/20200212/0217b269cf07130928615f02fec822f8.jpg

This is the first time I did any case forming and you guys been great with your ideas and advise. Would have been...

https://uploads.tapatalk-cdn.com/20200211/e68ee6f376e08d7b56fdb2254efd7b0c.jpghttps://uploads.tapatalk-cdn.com/20200211/8012d0c8eef9fa92cdeb80d70c97526d.jpg
Rough trmming brass on my keycutter and...

What is this Lanolin/Castor oil formulation you speak of? Just 50/50 mix no alcohol?

Also what headstamp are those cases?


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20200210/d055a1d96b723649672632028eb2aa24.jpg

The Co-Ax is a great press but not so great with trim dies.


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20200210/0bfc779cf2b927f0622ff61fd273d87f.jpg

Thank you everyone for the great ideas. I am reporting back after a second attempt. This time I only have brass from...

*annealing not sneaking


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20200208/6109bc743cb44334876f6414ae50e078.jpg

This is my first attempt in forming cases, I don’t have any sneaking equipment so I just throw these on the press...

I got it to work on an older computer with Linux installed and I think GRTools is very promising.
My 7.62x39 load with 123gr FMJ and 27gr 1680 seems to track very close to the books.
...

Forgot to mention Home Depot sell a decent hand brand adjustable height work bench.

https://www.homedepot.com/p/Husky-62-in-Adjustable-Height-Work-Table-HOLT62XDB12/301810799

I don't know if this helps, but it helped me a lot when I was running a factory.

https://content.statefundca.com/safety/ErgoMatters/StandingGuidelines.asp

This the the vertical trimmer.

https://uploads.tapatalk-cdn.com/20200110/027842e6ee4e00545fb3ab15106fca15.jpg


Sent from my iPhone using Tapatalk

I've returned to reloading recently and looking thru my reloading stuff collected over the years and discovered I have 2 Forster trimmer for some reason.

A quick look on the internet shows there...

I’m using stat line brass too. 7 out of 100 split after the second fire. The boolits were .314, you do have a point, that could be the reason.


Sent from my iPhone using Tapatalk

I have been destroying my brass with the .327 Federal, I have tried 115gr RNFP with 6.0gr of HP-38 or 11.7gr of H-110. Both these loads were destroying my brass out of a 4.2" SP101.

I have settled...

So I went and bought the Lee 311-100-2R and 311-93-1R since Midway has free ship for $49 on Lee products. Going to try tumble lubing these first before I shave the 311-100-2R on the mill. There was a...

I do have access to a milling machine and that sounds like a cheap way for me to get a 32acp boolit.



Sent from my iPhone using Tapatalk

So I'm into .32 for the best part of a decade now, allegedly the one true caliber and all.

It all started a number of years ago when I got an estate sale deal where I acquire a large lot of...

That’s what I’m using them for. M-dies and other random utility dies. Also dies that I want to be handy during a press run.


Sent from my iPhone using Tapatalk Pro

Saw this at the clearance isle the other day and it works perfect! The barcode is 076903061899
...

I looks for replace reservoir by going to the thrift store and look at their selection of plastic drink bottles. Oftentimes you will find something that fits with some minor fitting.

My local reloading supply store recently had a car crash into their building, the bench with a Dillon mounted took a direct hit. Apparently the press survived without damage!
...

I saw recently that Forster had come up with B4 version of the CO-AX, the main difference between B3 and B4 being a larger diameter drop tube.

My 70s Bonanza CO-AX and 2 Year Old Forster B3 CO-AX...

I still use them, APS system is very fast. Where did you hear RCBS is moving away from them? I am still trying to get hold of some yellow strips to load my WLR primers into.

I have the CO-AX for the best part of a year and been trying to get hold of a Forster Universal puller for the last 6 months, however they seems to be out of stock everywhere for months.

I know...

Mostly to do with shipping cost or if parts are in back order.

BTW, liked what you did. These old Reddings are the only drum type I've tried that meters well with small charge of flake powder.