I've used it for fast 1230 fps 1oz 2-3/4" 20 ga pheasant loads since 1970. Also in .44 mag and .357. I'm now saving the last 2#s I have for the shotgun loads.
Type: Posts; User: Minerat
I've used it for fast 1230 fps 1oz 2-3/4" 20 ga pheasant loads since 1970. Also in .44 mag and .357. I'm now saving the last 2#s I have for the shotgun loads.
Forum: Casting Equipment
Call RCBC first because shipping from the Netherlands to California might be cost prohibitive. I'd also heat it to soften the old lube but use a electric heat gun instead of a torch. I'd probably...
Forum: Cast Boolits
I have a NOE 358-100 2 cavity PB. with 3 pins, they cast: solid = 101 gr, Cup point= 97gr and LHP=90 gr. It drops 0.359" dia.
Forum: Casting Equipment
Use a graphite pencil to color the tips of the pins. I also use some 400 grit sand paper to polish the pit tips too if they look rough.
BK beat me.
Just got notice Starline is shipping back orders on .327 Fed Mag brass. About $30.00 per 100 in 500 lot.
Forum: Lead and Lead Alloys
If you join Team Boolits, when you choose your level of participation and pick "order" it will give you a payment choice under the paypal option or contact via private message (PM) No_1 and he can...
My 4" stainless .357 has the factory rose wood inserts. I just can't find anything I think looks better. You might check these guys out though.
https://chigsgrips.com/
Back when I started reloading shot shells high brass usually indicated the loads were duck or upland bird hunting loads. I prefer high brass for reloading it just looks better in your vest. The low...
Forum: Our Town
If it is this place they take credit cards and pay pal according to the banner at the bottom of the home page. But they are not in the Harlan Iowa business yellow pages. I'd be leary. $85 for cci...
Forum: Black Powder Cartridge
I bought a 48" 3 /8" Acetal (delrin) rod from Granger & cut off 8" to use as a chamber wipe the other 40" as a push thru wiping rod.
Search Granger for:
General Purpose Acetal Homopolymer Rods...
Forum: Cast Boolits
Starline is now taking backorders on .327 federal. Lot of 500 @ $154.00.
Forum: Reloading Equipment
I just finished prepping 250 mixed mil brass and only found 3 that were really hard to deprime, but did not look at the bases :veryconfu. I would like to know what brand you are having that issue...
Forum: Reloading Equipment
I use a Frankford Arsenal Platinum Series Hand Deprimer Tool for Standard Primers. If you can't punch out the primer, at least you don't break the pin, unless you have a grip like the Hulk.
Forum: Military Rifles
I use lead egg sinkers or BP round balls.
Forum: Our Town
This is the key to the problem. When the boss wants something left you have to use devious methods to win out in the end.[smilie=1:
Forum: Boolit Lube !
Check this out. Works pretty well for me.
https://castboolits.gunloads.com/showthread.php?83552-Lube-stick-molds-my-version
Forum: Swappin & Sellin
Right below the original post is an edit post pick point. Right next to the reply pick box.
Forum: Our Town
Got a flat rated envelop with nothing in it that was 2 weeks after it was scheduled for delivery. At least they taped the hole shut.
I will say that it probably was not their fault since the mold...
Forum: Our Town
Everyone if this happens to you, pick that little triangle in the lower left of the message and report it to us so we can deal with them. In this case he has been banned.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |