Search:

Montana Bullet Works has them.

Accurate Molds Company :50-350W for lightweights,50-450C for heavier work.Both shoot better than Lee 440.

Sometimes on humid days it don't coat as well.After I went to the PVC pipe coating method it doesn't seem to matter what the humidity is.Also I think the coating sticks better if I don't coat the...

After using Smokes powder I had to toss the HF stuff,life is good now and way better colors.

I didn't clarify that.I noticed the problem more after I started water dropping out of the mold,before PC.The water here aint fit to drink why do I put perfectly good boolits in it !

The jet black has been blotchy for me,a few bare spots.I shot over 1000 so far no issues.It seemed to happen after I water dropped them.

Accurate 45-200E.

I used it in the .357 and .44 mag ,shoots great and meters well.I will try it in a .45 acp soon.

Thanks,that was what I needed to hear.

Thanks for the reply.Let me tell you my dilemma.the Hornady Checks are discontinued,I am having a new mold cut and dont know what dimension the shank needs to be.I was going to have it cut for...

Does anyone know of the Gator checks in .50 caliber will fit well on a shank cut for a Hornady check ? For a 500 S&W.

45-200E gets my vote also.

Is the stop adjustment backed out below the die ?

I found good accuracy and nice case fill with 44 Mag.It seemed kinda smokey until I got higher in pressure.

BLC-2,H322,H335 also work well for stable reduced recoil,there is data out there but you have to dig for it.Include John Ross and 500 magnum in the search and something should come up.I will give...

+1 on the NOE.And the sizer diameters are more practical.

+1 on the Montana Boolits,I tried those and they are a fine product esp. if your not casting yourself yet.

4100,1680,2520,4064,4350,#5,2495 and Herco.

I saw the best group today I have ever shot,.432 200RF using HS-6.You will like it.

Yup,too small,to hard.Both my 29s need .432 diameter to shoot well.

Its working better now.I seat the check with the lyman .325,then a light coat of BLL,they go alot easier that way.But I still cant seat the checks with the NOE first.It will be fine.

I will seat and size .325 first in the lyman then to .324 with NOE..Do you need to use lube first with the NOE sizer with a gas checked boolit ?The plain unchecked size easy.

I learned to not submit a mold design when your dead dog tired and your eyes dont see right and forget to change the lube groove depth so its not too shallow for a shiney new brass mold.

Are these sizers not meant to install checks ?.I tried some .324 and .501,the boolit gets a little past even with the bottom of the sizer bushing then stops.I weight about 250 and cant force them...

Hi gang. I have never designed a mold before,is there a benefit to multiple smaller grooves over a single larger one.There are many of both designs in the catalogs so I would like personal experience...