So I have dozens of spare discs and I was wondering if anyone had an aftermarket solution for just the risers for the double disc kit so that I can use a few more discs that I already have instead of...
Type: Posts; User: lifeon2
Forum: Reloading Equipment
So I have dozens of spare discs and I was wondering if anyone had an aftermarket solution for just the risers for the double disc kit so that I can use a few more discs that I already have instead of...
Forum: Casting Equipment
Thanks man its a little hard to read but totally doable :)
Forum: Casting Equipment
Hey guys I recently bought a copy of the first edition manual on ebay and it is missing pages 157-160 which is where the rest of the slug/buck data for 16 gauge is. Considering that it was the only...
Forum: Coatings and Alternatives
tried something a little different with a 1.5 coat instead of a double 196057
you know the safe on paint thing makes sense on to something rougher :-D
Forum: Cast Boolits
perfectly safe and to be honest at a 1 grain difference makes no difference at all
Forum: Reloading Equipment
I saw a thread on here somewhere but I cant seem to find it now about fixing the powder leak in a loadall????
smooth bore, the thought occured to me as I was looking over some round ball loads (usually .690) seemed like the #68569 would have a better BC than some of the slugs out there. course if I could get...
anyone ever try a lyman #68569 Minie Ball as a sabot slug? it is supposed to cast at .685 and 730 grains seems like it would be pretty workable.
I dont even have a 20 gauge and I think that is awsome :drinks:
Forum: Casting Equipment
sometimes you just gotta take it apart and clean it it only takes about 15 minutes I usually do this 2 or 3 times a year no drip
I actually just ordered those exact parts for my load all in 12 gauge I think it was around 6 bucks or so from lee
Forum: Our Town
I have h110 and blue dot as follows
H110 11.5grns 1212 fps
blue dot 7.5 - 8.2 grns 1124 - 1225 fps
Forum: Our Town
All my load data for jacketed bullets shows vihtavuori
N110 11.4 - 12.4 1107 - 1204 fps
N105 8.4 - 9.4 1020 - 1123 fps
3N37 6.4 - 7.2 891 - 991 fps
N350 6.2 - 7.1 838 - 966
Forum: Cast Boolits
Hey I am looking for some folks in the albuquerque area that cast shotgun slugs I need to cast up some slugs and was wondering if we could set up a lend/ temporary trade kind of thing?? I have 15 or...
He means this chart
http://www.midwayusa.com/midwayusa/staticpages/charts/lee_bullet_Molds.htm
man it seems like maybe they could be lapped to make a mold for a 40-65 or a 40-70 they both take...
I've never had a problem and I have tumbled more rounds than I can recall
gotta go with dale on this one practice ammo should be the same as hunting/competition ammo that way there are no surprises when you :Fire:
well of course rollin your own means you have loading equipment I would follow that up by casting shot, do-it sling shot mold, this will reduce cost on shot if you just use wheel weights, send your...
see thats kind of what I was thinking a true fit at + .001 over bore but bore diameters as well as slug diameters vary alomost wildly from one manufaturer to the next it seems like the use of...
Longbow thats sort of what I was thinking, working on the drawings now to send to a machinist buddie a couple a states over. Probably gonna be a year long project at least but if it works it should...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |