Thanks
Type: Posts; User: MaLar
Forum: Black Powder Cartridge
Brought a tear to my eye and made my heart flutter.
Forum: Muzzleloading.
I'm getting close to having all I need to make a batch. When I do I think I'll make two trying both Nitrates. StevenDJ those labels are great how did you make them.319070
I just cleaned up a mold that was rusted looked worse than it was. I used citric acid in warm water and a tooth brush. Soaked the mold for a while and brushed of most of the rust. Soaked a little...
Forum: Muzzleloading.
I have 20lbs of this crap. What's the ratio of water to Kno3
Forum: Muzzleloading.
I've been following this thread for some time now. Copied some of the information into a text file. Lots of good stuff here. I've gathered most of the stuff to start but have a question on some...
Forum: Boolit Lube !
I make my own lube. I loaded some BP cartridges in 2017.
Shot them last week worked as well as six years ago and didn't dry out.
1 Lb of Bees wax
1 Lb of Sheep tallow
2 Oz of Lanolin
2 Oz of...
Forum: Casting Equipment
Did you get the instructions? I have the ProMelt 2 and you need to follow the instructions when turning it off.
Forum: Cast Boolits
When I first started loading cast bullets I failed miserably. I was so frustrated I gave up for a few years until I bought a cast bullet reloading manual from Lyman. Don't give up things will come...
Forum: Frequently Asked Questions
Is there a better way to get in touch with him?
I tried on the vendor page, last time he was there was 04-28-2021.
I tried a PM last Sunday no answer as of yet.
Forum: Frequently Asked Questions
I've decided I need a PID for my RCBS Pro Melt 2 and my Lee pot.
The RCBS won't hold temp it'll go way over when set, then when I adjust it down trying to find a happy spot the temp drops like a...
Forum: Case Forming / Re-forming
The OP is going from 30 CAL TO 375 CAL. I was going from 35 cal to 45 cal ended up with a bad case of leaded barrel. If your going to blow a case say from 300 H&H to 300 Weatherby. Then things should...
Forum: Case Forming / Re-forming
Don't do this with cast! You end up with a lead lined pipe with a hole in it the size of your boolit.
Done there bin that.
Forum: Factory Rifles
I have an AR in 6.5 Grendel. It's supper accurate.
Forum: Our Town
I would think old Georges rifle went home with someone else that day.
Forum: Coatings and Alternatives
This is from my 35 Whelen 1x14 twist. Alloy 2 lbs Foundry and 12 lbs Lead. Hardness is about 12 plus.
Ranges is 100 yrds. No fouling clean bore when done.
308705
I have this mold. I shoot it in a roller and a wild cat rifle I have. Plus I size to .455 and shoot it out of an
Older Ruger New Model 45 Colt. Shoots well in every thing I've tried it in.
You could try your local bike shop and cut the trigger finger out.
I know you want shooting gloves but I have good luck with what I got from the bike shop.
Forum: Cast Boolits
I cast about a 1000 Lee 358125's. One of my favorite boolits used in 357 and 9mm.
I bought a second mold so I can use two at a time. The boolits just poured.
I put a new 35 Whelen together on a Savage 110.
Used a Tasco World Class WOHOO! Rolling my eyes.
Never even got it sighted in, the Whelen was to much for it.
Sent it in for repair I think it was...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |