Search:

Thank you

My problem with my 22-250 shells not seating has been solved
a bit of stupidity on my part . The problem was I was not lubing
the cases and after I had a nice visit on the phone with a good
friend...

Brad ,
I've tried setting the die lower but it will not go down to the shell holder.
This small case sizing die, who makes them and would Cabela's carry this or
would I need to check out Midway or...

This brass was given to me so I have no idea how many times it's been fired.
What's this small base sizing die ? I've been away from re-loading for 30+years
so I'm not to familiar with the new...

I re-load 9mm 40 cal .308 and 22-250 everything is fine except when I reload my 22-250 the bullets do not seat and the bolt will not close I have to tap the bolt to get it open at first I thought it...

Have a Basic HandLoading book who wants it just send me a PM

I'm fairly new to this group and since I've been on here I've gotten great help from great people. I now have a question,I need to buy a tumbler but don't want to mortgage the house, who make's a...

If you have any copies of your survival books left I'd appreciate a copy . Thank you
WW

I'm in West Point about 70 mi. NW of Omaha

I've been on this Forum for about a month now. I'm going to start molding my own bullets. If anyone has an extra or old 9mm , 40 cal, 308 or 22-250 mold they are not using I'd appreciate it I could...

Being A Vietnam veteran I'd love a copy of your survival manual if there are any left. Thank you WW

I have a .30 cal carbine from WW 2 that was made by GM in 1943 . I found this in an abandon farm in the basement .Once I figure out how to post pictures on here I will post it.Also have a .32 cal...

I fixed mine broken one

Thank you I did look in my Hodgdon 2014 Annual reloading book and it showed the same. Thanks again
...

I checked my loading book and Longshot will work I ust don't carry it with me everywhere I go.
Thanks for your input

I went to a gun/reloading store looking for a good powder to load 9's & 40's they were all out and he gave me a substitute telling me this will work for both
what he gave me is Hodgdon LongShot...

Thank you I'll get a hold of 'em

Well I did get the shell out but the decapping pin is broke so I'll need to buy just that if they sell just the pin if not I'll have to save some money and buy another 308 die. Thanks everyone for...

Thanks everyone shell is still stuck I'm making a puller to see if I can get it out that way

This RCBS die seems like it doesn't come apart but it has to I can get the de capping pin unscrewed to where it'll wobble but can't get it to pull out

Have'nt tried that I'll check that. Thanks for the idea

Lee lube.I lubed the shell pretty good but it still stuck. Do you run it up all the way or just til the primer falls out.
I did 9's and 40's ran those up all the way with no problem. I hear rifle...

Thank you for the help I'll try the puller. You are all very helpful to a new B

Seeing I'm new at this I went to de prime and size a 308 this morning I lubed the case and when I went to bring it back down the shell stuck inside the die.There's maybe am 1/8 showing. Whats the...

Those are very nice looking bullets. What do you use to measure your quantities or do you just eye ball it?