Search:

120gr Cast LTC's over 5.4gr HS-6 w/ CCI SPP work Great in my TZ-75 9mm.

So far it looks like 5.4gr of HS-6 is the Winner Hands Down.
Burns Clean, Functions Perfectly, Light Leading & Very Accurate.
Still need to Play w/ the "True Blue" some more.
Really Like the way...

Funny...My Light Load in the .30-30 is 7.6gr TB w/ Lee 170gr LRNFP.
Real Fun Load. Zero Kick & sounds like a .22.

Here are some Articles on this Subject you may find Interesting:
http://members.shaw.ca/cronhelm/DevelopSubsonic.html
http://floydpics.wordpress.com/developing-subsonic-loads-for-centerfire-rifles/...

My 1894 Marlin Really Likes the Lee 158gr RNFP (50/50 Lino & WW) tumble lubed w/ LLA over 6-8gr HS-6 in Rem .357 Brass w/ Rem SP Mag Primers.
Super Accurate (3/4in @ 54yds), No Leading & A Pleasure...

Thanx 4 the Info Popper.
I believe My Old '74 336 has a 1-12 Barrel & it Shoots that Combo Great.
Nice to Know that it will Work in the 308 for Game Loads too.
Really Like the way that those Lee...

Agree w/ YunGun 4198 is a Very Good Shootin Powder w/ these Boolits.
Except that I'm using 20gr of H-4198.
Sweet Load. Nice & Mild & Super Accurate.
UncleSarge58

Wish I could Get & would Like to Try Both W-231 & HP-38.
None to be Found Round Here [smilie=b:
Tried a Few "True Blue" Loads this evening. Started at 4.5 then 4.7 & 4.9 gr.
All 3 Very Accurate &...

The Mold is a Lee 356-120-TC Double Cavity #90239.
Also bought some Ramshot True Blue Powder to Try with it.
According to my Lee Manual 4.5gr of True Blue should do the Trick.
UncleSarge58

Try 30gr LVR w/ Rem Primers & Brass. This is My Pet Load in .30-30.
I shoot the Same Boolit w/ this load in my Marlin 336 w/ Excellent Results.
I get approx 2000fps w/ 3/4in groups @ 75yds &...

You might want to Try BL-C(2) or LVR Powders w/ that Boolit.
BL-C(2) is my Go To Powder for my favorite 168gr J loads in my 700BDL.
With these I get < 3/4in groups @ 100yds. Performance on Game is...

170gr LRNFP w/ Copper GC over 4.3gr Trail Boss in Neck Sized Rem. Case that have been Once Fired w/ Factory or Hunting Loads & Mag Primer.
Clear the Barrel Every Time & Group +/-1in. @ 50yds in my...

Just got a New Lee 120gr TC Mold & can't seem to Find Load Data for that Bullet Weight.
My Standard Load for this Gun is 115gr XTP or Nosler HP over 6.8gr HS-6. With these I can put All 15 rounds...

Greebe,
Just use the Load Data Published for Plastic/Paper Shells & you'll be Fine.
Just Use the Start With Load & Work up Slowly to Max.
Just Follow Safe Reloading Practices like any other Brass...

Great Mold you got there. Straight Wheel Weight Lead Will Make Great Boolits in it.
With this Boolit 20gr H-4198 (1700fps) is a Great Plinking/Small Game Load
& 30gr BL-C2 Will make a Fine Black...

blaze blaze,
Try 20gr H4198 w/ 170gr Cast LRNFP (1700fps)
Very accurate out to 54yds in my 336, Adequate for Close Range Deer & Real Fun to Shoot.
For Squirrels & Rabbits 7.6gr Trail Boss Is...

Big Slow Lead when Well Aimed at Close Range ALWAYS Kills Deer Dead;-)
Maybe it's just me, But, I don't Like Hard Kicking Guns or Loads.
For Me a 170gr Cast LRNFP w/ 20gr H-4198 (1700fps) or 30gr...

Agree 100%,
Try a 240gr LSWC over 12gr Trail Boss w/ a Mag Primer.
Got an 8 Point w/ One Last Season @ 50yds. GREAT LOAD!
Shoots +/- 3/4in @ 54yds in my 444S.
Nice Mild Load, Really Fun to Shoot...