Thanks for your to the point answer as i was looking for a bore riding lyman mold number. Now to find a 311299 mold
Type: Posts; User: wayne h
Forum: Frequently Asked Questions
Thanks for your to the point answer as i was looking for a bore riding lyman mold number. Now to find a 311299 mold
Forum: Frequently Asked Questions
Ok this sou nds like fun, now back to my question. Wayne h
Forum: Frequently Asked Questions
Ok is a lyman 311291 considered boar riding. Wayne h
Forum: Military Rifles
Hang it on the wall. I never play with a stacked deck. Just my opinion. Wayne h
Forum: Frequently Asked Questions
What is a boar riding boolit. Wayne h
Forum: CB Loads / Military Rifles
I am looking for a load for the 300 win mag. using lyman 311291 gas checked. Have a ton of h4831. can not find anything. anybody help? wayne h
recently obtained the lee .452-200 swc mold. it drops at between .453.5 to .454. made up some dummy rounds without sizing and my gun chambers ok. any problem shooting these without sizing?? wayne h
just starting to reload for my 1911 45 acp. am using 200 grn lead swc and 6 grains of unique. problem is unique burns very dirty. what would a cleaner powder to use for this. maybe green dot,...
Guys---good news my problem was a combination of seating depth and the crimp.
I knew you guys would come thru and you did. These things now fit slicker than a whistle. Thanks. wayne h
am using a semi wad cutter and feeding from mag is great. I am referring to lock up. wayne h
Am still learning to load for 45 acp. I am using 200 lead bullets sized to .451. Cases will not chamber in a 1911. What up? thanks wayne h
Any body have any 45acp loads using 2400,that they would like to share? i have a lot of 2400 and hope it can be used in a 45acp. thanks Wayne h
Just started reloading for the 45 acp, using range pick up brass. I have noticed that speer, some federal and blazer brass has a smaller primer pocket from remington and some other federal head...
Forum: CB Loads / Military Rifles
Paul H. I find the mold sticks less often when I do not use the ladel to mold and tip the mold method. When I pour with the mold held horizontal the sticking is less often, but I find I do not get as...
Forum: CB Loads / Military Rifles
What is causing my bullets to stick in the mold? Am using a lyman steel mold casting wheel weights. Have tried smoking the mold, raising and lowering casting temp, opening the mold quickley after...
Forum: CB Loads / Military Rifles
i am sort of new to this cast boolit shooting. my garand is a danish return w/var barrel that is stamped .309, i assume this is the groove diameter. i size at .309 because of this w/no leading...
Forum: CB Loads / Military Rifles
seeking help for a load for the garand. i am using the following components:
1. wheel weight cast lyman 311291 sized .309 w/gas check.
2. between 32 and 36 grains imr3031 and h4895
3. cci 200...
Forum: CB Loads / Military Rifles
I converted a lee gc 30 cal 165 gr mold to a flat base mold. I am doing this in an effort to shoot without gas checks. I have 700x/ unique and 2400 powder coming out my ears. What would be a good...
Forum: CB Loads / Military Rifles
I am using a combination of Hornady,remington,federal and winchester brass all civilian brass, pockets are clean. This is only happening w/the Hornady and remington brass. The primers are old CCI,...
Forum: CB Loads / Military Rifles
In reloading for 30-06, I use the same brass in 1 rifle therefore neck resize only. I have fired this brass several times w/a lyman 311291 gas checked bullet using either 16.0 grains of 2400 or 42.0...
Forum: CB Loads / Military Rifles
i am looking for a plinking load for the 06 using a 160-180 gas check bullet w/o the gas check- using 700x or unique or 2400, that will not lead my bore. please help. wayne h
Forum: Smokeless Paper Patching
been shooting a 17 enfield for several years using a 311284 lyman mold, casting wheel weights w/a gc. powder is 16 grns of 2400. this gun and combination produces satisfactory groups at 100 yards....
Forum: Lead and Lead Alloys
my neighbor gave 2 ingots that are 2 ft long 2 inches wide that are pointed on 1 end and notched on the other. they are marked w/" kc matrix co." my neighbor thinks these were used somehow in...
Forum: CB Loads / Military Rifles
looking for a load for a 170 gc bullit without the gc for 30-06 and 308 win, using 2400/unique or 700x that won't lead my bore. just tried 6 grains of 700x that leaded my bore terribly. my bullet is...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |