Search:

If there have been some testing, check out grabcad or any other dad library's. Just search for lee reloading and see what pops up.


Sent from my iPhone using Tapatalk

Might need to contact RCBS on that. Sometimes you get a helpful tech...other times you get someone with an attitude...just hang up and try again lol.


Sent from my iPhone using Tapatalk

Lol, that is pretty slick system of storage.


Sent from my iPhone using Tapatalk

jrdztech and Smoke4320

I've already claimed the multi tool and sent someone a new lee powder charging kit...however if nobody claims either of your .45 brass I could sure use it. Recently got into...

That's awesome! Like the compact setup. So you used a lighter body, single throw switch, limit switch, cell vibe-motor, and what size battery?


Sent from my iPhone using Tapatalk

I have the small and large coming my way. Thanks! I've seen a mod where a guy installed cell phone vibrators on the primer Shute. He says this fixed all his primer feeding issues and can load 150 and...

Omega, got the multi tool. Many Thanks and Merry Christmas [emoji106][emoji319]
https://uploads.tapatalk-cdn.com/20171214/fa51770dd4fbedda8240ae01c3a99183.jpg


Sent from my iPhone using Tapatalk

I almost shot mine with my .45 yesterday. **** priming part is giving me fits. I loaded up 600rnds with maybe a 1-2% failure rate. I cleaned everything and re-lubed it. Now it works about as a good...

Ahhhhh well then, perhaps loads are a tad bulimic.


Sent from my iPhone using Tapatalk

If same ammo is working in other guns, then like the gentleman above us said "your recoil spring is worn out" that would be my .02


Sent from my iPhone using Tapatalk

10-4 good buddy it's yours, pm me your address. Also I have a new chain from lee coming in (next Tuesday) when that arrives I will ship [emoji106] everything else should be there.


Sent from my...

If you don't have a sizing die, I have one you can have. It's for the 9mm and it's a lee .356 sized with pusher and Ben. I have a .357 and primarily use that. You will need a single stage Press,...

Just got a .357 lee sizing kit. It's the exact same as the .356. It's not a lee issue. The RCBS just has different standards for their slot sizes at least for this model. I am considering sending it...

Sizing pusher and die is brand new from titan reloading. I have another sizer kit coming in. It's possible I received a dud but not likely.


Sent from my iPhone using Tapatalk

I could use a multi tool. lost mine a while back. I'll take it lol!

I can meet your call with a brand new Lee powder charging kit (came with my loadmaster) never used it's the one with the chain...

Thank you for your help [emoji106][emoji95] I'll try some of your tips tricks and tactics tonight.


Sent from my iPhone using Tapatalk

I'll check again but I believe it's .998. Could be off a few smooshas lol. Thanks for your help Sir [emoji106][emoji95]


Sent from my iPhone using Tapatalk

Must have gotten a bad rep, she insisted that they don't make parts for the rock chucker. I even asked what it would cost to replace the ram. Me thanks I got a bad rep ?


Sent from my iPhone...

I spoke with an RCBS person over the phone. They were pretty adamant staying that the pusher wouldn't work nor did they make parts for this rock chucker anymore. Which is conflicting on what you're...

It doesn't appear to be a mashed down. Sure it's a little pitted but it doesn't seem like anything is deformed.


Sent from my iPhone using Tapatalk

Hey guys sorry for the late reply. Everyone that is helping out I really appreciate it [emoji106][emoji95]


Sent from my iPhone using Tapatalk

Hello, So I called RCBS and found out that they do not make any bullet sizing top hats/or (pic 2) parts that fit into the slot on the Ram for my RCBS Rock Chucker. There lubamatic line is the only...

Old crow medicine show, Dwight Yoakam, Rush, Ozzy, Joe Bonamassa, Periphery, BBKing, Walter Trout, led Zeppelin, Townes Van Zant, Zane Williams, Pantera, Black Label Society, Mastodon, Ramstien,...

ww water dropped, makes them much harder on the hardness scale. By the way very little leading!

Howdy folks, I am new here and I think I have found a great group of people who all share the same addiciton "BOOLITS"