Search:

Seen them priced in the mid 7's in my neck of the woods

I've seen 2, and the dealers who had them would not be considered top tier...

The K31 that I owned shot really well with the RCBS 165 SIL sized to .309

Fairly certain these are Russian primers................

Amazing the abuse they will take even from centerfire rifle slugs...................

If you think golf balls are tough try a bowling ball..............

What Porthos said............

I've had both the blade and the burr, and prefer the burr...

Carbide end mill in a milling machine....some are harder than woodpecker lips

I would remove the action from the stock and check the condition of the metal below the stock line. Browning purchased a process from Morton Salt to speed up the stock drying process. A good idea in...

Remington produced the 504 in the USA. The model 5 was produced by Zavasta..............

Never had a problem using Win LP primers with cast bullet loads......257 Roberts, 260 Remington, 7mm08, 308, 30-06. 30-40 and 7.5 Swiss

The 1 in 11 1/4 twist was used for the 175 grain Sierra's and the action is long enough for a rebarrel to 300 win mag if desired on this one. Both barrel and action are stainless and it came in an HS...

Getting readfy to wring out my Remington 700 M24 clone, it's got the 1 in 11 1/4 twist with the 5R rifling. Going to use the RCBS 165 Sil and some 2400 powder.

Check on ebay, they always have a supply of used lab grade hot plates, mine has a ceramic top and a very good temperature control..........

Are you sure it's not one of these........
...

Colt Sauer made by Sauer & Sohn in Germany, rear locking lug design. Three bolt lugs were flush with the bolt body until the bolt handle was lowered. In essence it was a cylinder in a sleeve until...

Revolation Arms
Jeanette, Pa

Revolationarms@hotmail.com

Basically #2 alloy, LBT Blue lube, playing with 15 to 16 grains of 2400, Winchester Large Pistol Primer, 1 grain of Dacron filler. Have not checked velocities. This combination of powder, filler and...

Cooper M22, 1 in 9 twist 6 groove factory barrel. 20 MOA base, Bushnell Elite 8x32267803

First 200 yard group........267800

RCBS 140 grain sil, 2400 powder @ 100 Yards..........267718

Group 1 5 shots .763" (4 in .366")
Group 2 10 shots 1.111" (7 in .835")
Group 3 10 shots in .711" (with 1 grain dacron filler

I bought a Rockchucker in 1972, but use an RCBS A2 currently.

I had one with the rotary magazine, accuracy was good..........BUT THAT MAGAZINE SUCKED, almost impossible to single load and wasn't that great on feeding.

I paid $299 out the door for the Model 30............