Search:

I am unable to find any reference to demonic possession in a person who has be "Indwelled" by God The Holy Spirit. How one receives the indwelling is clearly explained in the scriptures. BUT, and its...

That is a good looking shell!! The 600 produces great reloads. I loaded on 600 Juniors for years.I had them in 12, 20, 28 and .410.When I was shooting tournament skeet, I would reload anywhere from...

Honestly, I was unaware that there was such a thing as a 3" AA hull. Fired 2-3/4" hulls measure a tad over 3 inches. I have trimmed 3" to 2-3/4" as Teddy (punchie), but be careful 3" hulls tend to...

I don't believe that will work. Loads for 2-3/4" hulls will not complete fill 3" hulls. It will never crimp. You will need to use 3" load data for a 1oz. load which will include a different wad or...

zinc type




steel type

I'm retired from fixin' Toyotas and the guys still save weights for me. I end up with 12 to 20, 5 gallon buckets every 3 months. Sorting is the worst part. After sorting, for a while, the zinc and...

Washing cornbread skillet, with soap and water, is a hanging offense.....

My recently completed project seems to require a "specialty" bullet. I acquired an, older, Colt Delta Cup frame, a newer Colt DE slide and a Kart 10mm C/P ramped barrel. I wanted this to be a "do it...

I finally got tired of modifying Lyman molds and purchased some molds from Accurate. I received them yesterday and they are great examples of fine machining.

I read that Tom's molds are designed...

I learned that lesson back in 1970 when I was plumbing. Cast iron pipe, oakum, lead and tar were necessary for making joints. 100lbs of hot lead, an 8" pipe joint, 10 lb lead ladle and a smidge of...

I have about 1/2 bucket of these things. They look identical to the, painted, "Factory" weights that come on Toyota alloy wheels, that is the Toyotas manufactured in Japan. Upon bending the weight,...

Thanks guys, I really appreciate it. Seems that the common consensus is, in order to keep the antimony soluble, tin content must be =or> antimony.

BTW. I worked in Toyota dealerships for almost 40...

Now that my, Lyman, molds are lapped to throw the correctsize using Lyman #2, I am curious as to how much tin and antimony are too much tin and antimony. Some believe that tin content, above 2% is...

I'll give that a try. One of my molds, that casts small, is the same mold that he modified. If the, what appears to be 09-13 stamp, on the mold, is the production date, mine appears to be the same...

3, of the 9, Lyman molds cast to specified diameter +.001 give or take a half. No problems with them. When I wrote "Alloy doesn't really matter" I meant no matter which alloy I try, the bullets are...

I have been casting, casually, for 25+ years, which means nothing other than I have been casting 25+ years. I am, recently, retired so I am attempting to become more educated about, serious casting...

I appreciate all of the info. I have all the ingredients, on hand, to mix up a small batch of Felix. Randyrat was gracious enough to PM me and ask if I wanted some samples. Of course, I said yes. He...

I kind of figured that there was no "real" definition of hard lube. Some of the stuff flowed quite well in a 80 degree basement. During the winter, not so well at 50-60 degrees. Un-processed beeswax...

Good evening. I, have only been casting centerfire for a couple of years. I purchased a used lyman sizer with a bunch of goodies. The thing came with 20+ sticks of various kinds of lube. I finally...

:redneck:Gotta love ths forum, especially for us older cheap..sorry, FRUGAL guys.
I have an older Lee Pot. I got it used in the early 80's and used it for muzzleloader balls. It looks similar to...

Cane Man:

I really appreciate the specs. I found a photo of and old and new pressure nut "piston" here:
http://img.photobucket.com/albums/v16/eddard49/450pressurenuts.jpg
It looks as if the...

Hey guys,

I really appreciate it. The old piston is ? at best. It has severe scratches and pitting. I was going to try to dress it down until smooth but I am concerned that if I take off .005 then...

Hey guys,

I am new to this forum and boolit casting and sizing. Except for round balls. Anyway, I picked up and old Lyman 45 from Ebay. Paid too much for it, 120 bucks, but it came with 14 dies, 4...