Larry, I plan on starting with my 'diluted' Lyman #2, the 95/2.5/2.5 alloy which in my first melt this afternoon tested BHN 10.5. I then casted about 50 each of the Lee 150s and Lyman 200. Here is...
Type: Posts; User: Silverseas
Forum: Lead and Lead Alloys
Larry, I plan on starting with my 'diluted' Lyman #2, the 95/2.5/2.5 alloy which in my first melt this afternoon tested BHN 10.5. I then casted about 50 each of the Lee 150s and Lyman 200. Here is...
Forum: Lead and Lead Alloys
Thank you all very much for your help on my quest for smaller groups at 50 to 100 yds.
For the last two years I have been using pistol range scrap that varies in hardness from 8 to 10 that I have...
Forum: Lead and Lead Alloys
Thank, that helps simplify things for me. (A retirement goal of mine). I have some Lyman #2 from Rotometals, is that a good place to start?
Forum: Lead and Lead Alloys
I have a Lyman 358530 mold that casts a 190 gr RN at .360 which is just a tad larger then the cylinder throats. I will give that a try.
Forum: Lead and Lead Alloys
I have been reading: Cast Bullet Alloys and Obturation By: Glen E. Fryxell and Heat Treating Lead/Antimony/Arsenic Alloys
By: Rick Kelter. I would like to create an alloy better suited to the...
Forum: Our Town
We had walnut tree on the playground of my grade school in Omaha. You can imagine the mischief we go into with all that ammo.
Forum: Cast Boolits
I recently went thru the same wrinkle problem with a Lee six cavity 358-150 RN. Two days earlier it dropped good boolits, then next time nothing but wrinkles. Reading tips here I tried solvent...
Forum: Lead and Lead Alloys
I got muriatic acid from Ace Hardware, this is a potent acid. A couple drops on the ingots and very little happened. A few small bubbles appeared but no foaming as described in earlier posts so...
Forum: Lead and Lead Alloys
thanks, I will have to look up how to do that.
Forum: Lead and Lead Alloys
Yesterday on my way to Shooters Supply I stopped at the scrap dealer where they were very helpful. We pawed thru a bin of lead pipe and other soft scrap and came up with some ingots marked Lavin and...
Forum: Lead and Lead Alloys
I have managed to mine and clean 800 lbs from my local pistol range. Soft stuff, <8 BHN according to Lee.
Our backstop is a slanted, heavy steel plate, but on the front face is hung rubber...
Forum: Case Forming / Re-forming
Lots of good info here, thanks...I feels like I am back in school again. Thats good, I am a fan of lifetime learning.
Yesterday I cleaned up the brass I shot on Monday so will be heading out to...
Forum: Cast Boolits
Last week I had a blood lead concentration performed at the clinic. The results back are 5.2 mcg/dL.
I am 67 years old, grew up in a suburb, have not worked in a high exposure environment, have...
Forum: Case Forming / Re-forming
Great day at the range today, high of 52F. The Mauser gave me a 6" spread at 100 yards with the Williams sights. I either need more of a recoil pad or limit the loads. No misfires, no cracked...
Forum: Case Forming / Re-forming
EDG,
I am very thankful to you and all the other experienced reloaders and casters here on the Castboolits forum. This issue of die design styles is something I never thought of as I got involved...
Forum: Case Forming / Re-forming
Thanks, EDG for the post.
I have reformed 30-06 for my 8 x57 Mauser with only one smooth stroke of the Rockchucker not knowing there was any other way. My first bench rest tests of the one stroke...
Forum: Case Forming / Re-forming
OK, so it is not just my inexperience. Thanks.
Forum: Case Forming / Re-forming
Yesterday I set up to reform once fired 30-06 into 8 x 57 mm for my Mauser.
I had done about 30 rounds previously with an RCBS die set, but have not had an opportunity yet to fire them from a...
Forum: Cast Boolits
Here is the photo of the slug. 8x57 Mauser.
http://i1117.photobucket.com/albums/k599/kd0etc/Mod%2098%20Mauser/F0F6B6E4-4B41-4AF6-BDF1-C376DA88268B_zpsoetztsbf.jpg
I do have a small sledge and...
Forum: Cast Boolits
Tim, I pounded three separate slugs today cast from fishing weights for a look at the throat and chamber. I will post pictures of them later after I do some editing on them. I used a steel rod and...
Forum: Cast Boolits
Goodsteel,
9.45 twist, that is close to 9.5 I measured. So that will limit the velocity.....Is that only for cast bullets? Can the jacketed ones be pushed faster? I see some comments that 2700...
Forum: Cast Boolits
Goodsteel, I have read the post you mention more than once. Thanks for putting that on the forum. Some of what you wrote I understand, and some I will need to study and practice more, like on doing...
Forum: Cast Boolits
Thanks, Ken. I know about tinkering, I have been a ham radio operator for a few years.
I will update the forum when I have had an opportunity to shoot these loads.
Forum: Cast Boolits
Retirement has given me the opportunityto progress from shooting factory loads in my Model 98 Mauser(Federal 170 grain) to casting and reloading my own bullets. My moldis a Lee C323471-175-1R that...
This Walther PPK 32 was one of a collection of guns my father brought back from France after WW2. ...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |