Search:

What you are talking about resembles an issue I had with my 35 Rem. Take a look at the pics of the rings. If it's the same issue I hope the thread helps. If not, then disregard my post....

I am going to assume unless otherwise told your reasoning is to smooth out the rough spots in the bore and wear the throat in a little. Then after see how the boolits fit and shoot.

Cleaned the bore really well with hoppes and a brush. Multiple soaks and scrubbing. Took the scope again and had a look. Spots are the same. I ran a tight fitting patch down the bore and you can for...

Tatume

If you have any suggestions on the 35 please take a look at my thread here
http://castboolits.gunloads.com/showthread.php?282236-Help-me-make-my-35-Rem-shoot

I would like to hear...

Looking for opinions and thoughts. I am thinking about a 92 in 454 casull for a light carry woods gun. It will be used for deer and hogs is the plan. Would put a peep sight on it eventually. This...

I will say these pictures are terrible quality. Even worse on the picture. They look a lot better on the screen but this is a low quality bore scope. This is the best I can offer with what I have. I...

None yet. Been so busy the last few days I have not had a chance to mess with it. Hopefully tomorrow or no later than this weekend. I may shoot GS a PM and discuss the throating option. I was offered...

From what I can see with the light I have it appears to be square. We have an automotive bore scope at work. I am going to borrow it and look in the chamber and see if it is.

I checked around locally and found a few smiths to do the throat. Going to be around 100 dollars. I could send it to GS but still gonna cost money. Now don't get me wrong, I have no problem spending...

Well I took a break from this rifle for a few weeks. Headed to the range this morning with 50 rounds. 25 of each bullet tumble lubes with lla, sized and checked at .358. 5 each .5 gr increments. Just...

Appreciate the replies. So looking at each picture can you tell me what you looking at. I notice on my 308 bullets when hitting the lands it's gradual with no lead push. For lack of better...

The necks are the same size as factory and chamber fine. I measured that on the first loading to compare.

Here are two pics of both bullets sized to .358 and chambered. I can adjust OAL but...

Yes the same rings. This has been happening on all loads. No matter size, seating depth, crimp or no crimp. Happens all the time.

Popper made mention of the ring forming on my dummy rounds. I...

Goodsteel I do size after coating. So the loads are sized and checked and then coated and cooked. Then sized again. I do not have a .359 sizer. I opened up my .356 to .360. Should probably have held...

Went to the range this afternoon. Took the 35 and the 30-30. Kill two birds with one stone. Get some shooting in and sight in the Scope on the 30-30. Gives me time to let each gun cool down. I took...

44man I would think that 400 is enough since its the same pot I made my last 200 308 from and have been shooting them at 2300+. Same alloy and same treatment. 0 leading in barrel. I started...

Since a sharp edge has bee mentioned a few times. Is it possible since I have one load that shoots well that it is not effecting accuracy? Or did I get lucky that the one load is just not effected by...

Hey Grumpa. Appreciate you showing up. The brass is really nice work. Looks great. I don't believe I have a brass problem. I believe it's a rifle issue or maybe something I'm doing during loading or...

I bake 400 for 22 mins. Just what I've always done. When I got the brass I sized 5 cases in a fl die. Compared them to unsized cases. Using a caliper the size was the same. The neck tension was a...

I really appreciate the help from you folks. I am heading to the range shortly today to sight my scope back in after putting a new mount on my 340. I have a few more rounds loaded up for the 35 that...

I wouldn't think it's too soft. It's the same alloy I use for my .30 calls. Same treatment. Cast, size with gas check, shake and bake pc, bake and drop into ice water from oven. I have run these at...

The rings are coming out with the case after firing. Some fall off but I raise the rifle and eject towards the shooting bench and they come out with the case. I tried ejecting slowly to see if they...

Too much info to put into original post so ill answer as they come up. I don't have a way of checking run out so I haven't other than roll on the table. I also made up 5 of each bullet with no crimp,...

The lead rings are happening when shooting. You can chamber them and eject them with no ring. The rings are there when ejecting the fired case. I use a lee expander die for belling the case mouth....

I recently purchased a 1979 Marlin 336 in 35 Remington. After getting some brass from Grumpa and ordering a mold from Accurate Molds I proceeded to start loading for this rifle. The mold I got is 4...