Saw that as well. Tried all the numbers in my home state, and others. No parts.
Would not take the job.
Type: Posts; User: REDBARON
Forum: Cast Boolits
Saw that as well. Tried all the numbers in my home state, and others. No parts.
Would not take the job.
Forum: Cast Boolits
Purchased a Winchester 1894 Leg. Frontiersman some months ago. Unfired.
After having acquiring a precision Accurate mold, 4-bags of Starline brass, RCBS Cowboy Dies, and a Williams FP sight my work...
Forum: Cast Boolits
The disc is placed in the proper slot. It stops short of the tube. Close, but not flush. There is a ledge (disc hole/drop tube) that I thought would contribute to inconsistent powder charges. Thanks...
Forum: Cast Boolits
Yes. Case specific to all die/turrets. Have used this measure for 7-8 years, with only minor issues.
Forum: Cast Boolits
My disc does not move forward over the drop tobe hole. Have taken apart, lubed with dry lube, and adjusted the die up and down in my turret press with no success. Any suggestions?
Forum: Casting Equipment
I had followed the instructions in regards to setting the temp and adding alloy. Two hours later, solid ingots. After calling the RCBS service line and being told to send the furnace back, I turned...
Forum: Casting Equipment
Just received the above furnace. After seven years with my Lee pots, decided to change. Had my first casting session last Friday. Long story short, I had to turn the temp dial to the highest setting...
Forum: Cast Boolits
The RCBS 150gr. Load with Rel 7. Outstanding bullet and accuracy.
Forum: Cast Boolits
Thanks for all the replies. Great forum and members.
Forum: Cast Boolits
During my last smelting session, wheel weights into ingots, I had a dark blue film (never had before) on top of the melt. Removal was easy enough, fluxed several times (paraffin), and the...
Forum: Cast Boolits
As always, I appreciate the info. The best forum on the net.
Forum: Cast Boolits
I know I have read this somewhere on this forum, but I cannot remember. What mold handles can be used on different brands of molds? Thanks.
Forum: Cast Boolits
Thanks to all who responded. As always, great members and forum. I have gleaned much good information from this venue. Again.. much appreciated.
Forum: Cast Boolits
I am considering switching from the Lee method (tumble-dip,etc) of lubing to the RCBS lube/matic. Allow me to state the Lee mehod has brought great results-excellent accuracy. The problem is the mess...
Forum: Cast Boolits
I am considering switching from the Lee method (tumble-dip,etc) of lubing to the RCBS lube/matic. Allow me to state the Lee mehod has brought great results-excellent accuracy. The problem is the mess...
Forum: Cast Boolits
Recently I purchased a Ranch Dog-Lee 6-cavity mold that drops a 85 gr GC micro-groove 25 caliber boolit. Standard wheel-weights. Sized .2585, and lubed with Lee alox. Tried six different powders...
Forum: Cast Boolits
303Guy.....my knowlege of paper patching is limited at best. Basically I know it exists. I will examine the subject, and get back to you. Interested in accuracy more so than velocity. Hope things...
Forum: Cast Boolits
My goal would be small groups on paper, and the ability to make my own, instead of shooting those "other type of bullets". Speaking of that RCBS 120 gr mold, does anyone know the overall length of...
Forum: Cast Boolits
What mold would anyone recommend for the above rifle,caliber,and twist. Thanks.
Forum: Cast Boolits
Thanks for all the great info. Yes, I did clean the copper fouling out before heading to the range. Used the Lee lead bullet chamfering die, bullet seating went smooth with no shaving, or any sign of...
Forum: Cast Boolits
Has anybody used the above mentioned mold? I loaded three different loadings using Trail Boss(19.5grs), 5744(22 grs) , and Reloader 7 (24 grs). Absolutely the worst groups this rifle,or I have shot....
Forum: Cast Boolits
Recently I purchased the Lee 30 cal mold - C309-160R double cavity gas check. I will shoot these boolits in my Savage M99 in 300 Sav. Alloy = wheel weights. Does anyone have any loads,or info, for...
Forum: Cast Boolits
What mold does anyone recommend, from personal experience, for the above mentioned calber and rifle? My main interest would be accuracy at 100 + yards.
Thanks.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |