I'm pretty sure the twist rate is 1 in 20"
Type: Posts; User: peerlesscowboy
Forum: Single Shot Guns
I'm pretty sure the twist rate is 1 in 20"
Assuming cast bullet rifle & pistol; Unique and "other"(4198). If I can choose another "other" it'd be a toss-up between 3031, SR4759, 2400 & 4831.
Forum: Rimfire Area
Hi guys again,
Update;
I gave up on the original barrel after lapping with bore-brite a couple of times with no beneficial effect and installed a factory contour Lilja barrel. Had it out to the...
Forum: Rimfire Area
I took the rifle to a professional gunsmith to have the action glass bedded and the barrel floated because of the poor accuracy out of the box, he (the gunsmith) suggested the crown didn't look right...
Forum: Rimfire Area
Happy to see the thread had a revival here :D
Update;
At the suggestion of lapping with J-B Bore paste upthread I tried it and I'd definitely say accuracy is much improved, enuf so that I'm...
Forum: Rimfire Area
Yes, I've tried 3 different scopes. Besides the old Weaver V7......., an old Weaver V 4.5 & a brand new Leupold VX-II 3-9x33mm Rimfire EFR. Also besides the Weaver "tip-off" mounts I tried Burris...
Forum: Rimfire Area
Is that the same stuff as "J-B Bore Bright"?
I gave the rifle a good bore cleaning this evening with Hoppes #9 and noted a few specks of lead came out with the first couple of dry patches. The...
3031 should do what you want without a filler. I'm using 4198 with a Ly 457125 running 1300 fps but I'm using a cornmeal filler. Winchester (Miroku) 1885 HiWall Creedmore .45-90
John C. Saubak
My thoughts also.
The .45-70 is so versatile it's hard to recommend a "favorite" load without knowing what you want to do with it. 10 gr Unique behind a Ly 457191 makes a sweet little gopher load...
Forum: Rimfire Area
What degree of accuracy should one expect from a good quality .22 long rifle bolt action sporter, specifically a Remington model 504?
From the box new I got 2 1/2 inch groups at 50 yards, Weaver...
Forum: Cast Boolits
Winchester model 90 .22lr, octogon barrel. Dad gave it to me when I was about six or seven as I recall, traded it on a new Marlin 39A "Mountie" many years later.....still have that one. Dealer...
Forum: Single Shot Guns
Are you shooting from a bench and resting the forearm on the sandbag rest? Try resting on the barrel.
I have a Miroku Browning 1885 "traditional hunter" .38-55 that shoots 4-5" groups at 100...
Forum: Cast Boolits
RCBS also makes a case mouth expander die.
John C. Saubak
Forum: Cast Boolits
I take the seater out after it's job is done and then lube.
John C. Saubak
Forum: Leverguns
If your mould is dropping 'em at a full .312" that's good! Run 'em thru' a (313) sizing die & lube 'em..........
John C. Saubak
Forum: Lead and Lead Alloys
FWIW, there's no magical qualities to "Lyman #2".........it doesn't nessesarily have to be the exact percentage of ingedients as long as you're consisent. It's basically lead with a little antimony...
Forum: Cast Boolits
I just paid $8 per 25lb bag of hard West Coast #8 shot, that's almost $2 a lb. Maybe reclaimed shot would be more in line with the price of WW?
John C. Saubak
Forum: Cast Boolits
I normally cast and then store 'em that way, I never size & lube 'em until I'm about to load 'em. Sometimes that might be an interval of months or even years, sometimes only days or even hours. ...
Forum: Cast Boolits
Put the cases in a loading block to charge the powder, then when they're all charged visually inspect 'em under a good light before you seat the bullets. It'd be easy to tell the difference between...
Forum: Cast Boolits
I've never tumble lubed but FWIW I s'pect here's the answer.
Forum: Lead and Lead Alloys
You're not diluting the antimony 50%, ruff'ly speaking you're diluting it just over 5%. True.....that doesn't bring the antimony content in the alloy up to 5% but assuming Lymans figure of 4% for WW...
Forum: Lead and Lead Alloys
9 # WW to 1 # 50/50 solder } 10 # 2 alloy is Lymans own recipe (page #57 Lyman Cast Bullet Handbook, 3rd Edition).
Also from page #57........."Composition & hardness of Common Bullet Metals"...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |