Search:

ALSO, sorry dont remember where I read it, but anything over a 10 can show clinical signs of poisoning, 3 months after my initial onset I figured it was lead and got tested, at that point mine was...

I'm with powderburner, cast it as is and use Black powder, you will be surprised how well it might do.

the BHN will dictate velocity, as Lee's book tells about....His reloading book is worth getting just for this info....saved me a ton of powder.

I got lead posioning last year from lead dust, tell ya what guys, if you get a good dose your gonna find out what pain really is, and it doesnt let up for months, its been a year now, my hands are...

I had same problem same gun etc...I went to 7-7.8 BHN and it stopped..12 is way too hard for 68 grains of regular goex , If the mix you have is not pure lead and tin, or the antimony and tin mix is...

what we had going was so outragous, one time I told on us and the LT didnt believe me, she had our section in a formation, I fell in with a foot and half tall reefer plant stuck in the back of my cap...

I was in the army back in the 70's...dang near the whole company smoked dope, when we cleaned our pot in the barracks we would drop the seeds out the windows, everyone knew never weed eat near the...

I knew you were, I seen that response on here before..believe me if I could sneak it by the boss I would have all star stuff

ok smart guy ! I followed the link you gave, and found it, it was under the traditional mold section..they sell a top punch for the lyman and redding lubesizers

hey gents, I have a new lyman lubesizer...wondering which top punch I need for the saeco 745 bullet, (the flat tip bullet) also I have the BACO creedmoor 535 grain bullet I would be using in the...

found this thread and got to checking my lyman turret press , sure thing out of alignment a tad....Have any of you found a press thats perfectly aligned ?....seems to me the bullet seating station...

I think the real question here should be, Does it pass the smell test of a guy like Jed Clampet ?....would he take to revenuers telling him he needs a piece of paper ?

there wasnt no directions !

I cant figure it out, I just got this lyman lubesizer and I set it up with absolutely no problems, and sized and lubed 500 - 9mm boolits...for some strange unknown reason it all went perfect.:drinks:

maybe you could just call the ATF and tell them to give you your stuff back.

http://www.infomine.com/investment/historicalcharts/showcharts.asp?c=Lead

from what I been reading the market for lead is dropping off to nothing, pretty soon it should be cheaper than we ever paid in the last 25 years.

Hey gents, Happy Thanksgiving !...I am going to get a lyman sizer luber for X-Mas..and will use it mostly for 9mm pistol plinking bullets, probly around 900-1100 fps using N-340 powder, Also I was...

man you guys are addicts to the max, GREAT !....:-D...where can I find a top punch and sizing die chart for the Lyman's ?...I went to the Lyman site and didn't see top punch chart....

great advice gents, I didnt even know about the "star" sizer...

was just reading the midway reviews, looks like the saeco is pretty good...just not sure whats easier, I will do like 300 bullets at a time, panlube or sizer..my lube is pretty soft so I may not need...

I need some internet bygod advice here fellas...Here is my situation...I been casting for 9mm using the lee tumble lube and am having to wipe every bit of lube off the finished bullets to prevent...

I had to seat real deep, and still get some jams..I am probly going to size to 357..if you seat any deeper than you are remember about powder compression, I had to rework my powder and loads when I...

this is great info here.....In my post I was referring to the common knowledge that I read, that soft lead bumps up to fill the rifling, I didnt mean it to sound like a 9mm specific thing......this...

I second the idea of the bullet...I could not no way get a 356 bullet to shoot in my M&P9 without leading, soon as I went to 358, problem was solved, same in my BPCR, I just could'nt get same...