Search:

Be sure not to over fill it! If you get lead in that ring on the top you will have a bear of a time getting that ingot out. Ask how I know.

I started when I was 16 casting REAL boolits for my 45 cal John Browning mountain rifle. Unfortunately the 1 in 66 twist hated the REAL boolits and it discouraged me from delving deeper into...

I will take a 434 4 cav with penta, small and plug pins please. aaronjondro at gmail dot com

Is it possible to also put in an order for some 338 checks to go with this mold like is being offered with the 8mm version? If so I would be interested in some as this is my first 338 mold and I will...

I will take a 4 cav gascheck

My local scrapyard has no problem with brass or spent primers. I typically trade my scrap brass for lead.

Sign me up for an RG4

Also if your shooting milsurp brass the crimped in primer can be a bit of a bear to get moving.

Sign me up for a 4 cav gc with 2k gaschecks

I wore out a set of mechanics gloves I got from the snap on truck. The finger tips and palms where leather but the back was cloth so they breathed wonderfully and where not as clumsy feeling as...

Lot of neat history in that video, thanks for posting it.

Any idea when we should be getting these?

Ray I seated them to feed in my mags. I guess I just dont see the point of a semi auto single shot ;) . Next time I am at my bench I will measure my dummy round and let you know.

X101 if you have not tried varget yet, you should.

I took this

http://i760.photobucket.com/albums/xx241/aaron_454/IMAG0063.jpg

feed it these
...

Ray I feed them through the mag and they cycled the action perfectly. When I pulled one out of the chamber nose deformation was minimal, all I could really see where the scrapes from the locking...

Finaly tried these in my AR10T in 308 win

5 shots at 100 yds

http://i760.photobucket.com/albums/xx241/aaron_454/IMAG0071.jpg

Load was 28grs varget in win brass lit with a win LR primer....

I got a new 440 gr .502 HP mold recently for my 500 S&W. When I tried my standard 50/50 ww to pb HP alloy I got leading mid barrel and the recovered boolit weighted only 210 gr. What alloy would the...

I just started loading cast for my garand last week. I am using the NOE 311365 mold and 35 gr of IMR 4064. Accuracy was as good as my jacketed loads but the action short stroked a few times. I think...

I would be up for an M1 postal match.

You may also want to check that the primers are compatable with your friends AR. When I got my first black rifle I loaded for it with the same components I used for my mini 14. As a result I had...

My stepdad gave me a Reminton 700 in 308 as a birthday gift when I turned 16. Along with the rifle he gave me 200 rounds of surplus 7.62X51. After shooting a few boxes of factory ammo I tried the...

Well after re reading the lube recipes I decided to try 1 lb beeswax 1 table spoon vaseline and 1 tea spoon johnsons paste wax. Success lube sticks to bullets and cant be easily brushed off. Now I...

Today I made 50 338 Lapuas using Lapua brass 250gr Sierra MKs 83grs of IMR 4350 and a Winchester LRM primer for ignition. I also sized and lubed 22 of my new NOE 311365 boolits in my new hard lube...

Does the felix lube store well on boolits? Also where can one find lanolin?

Adding heat is no problem for me. With the thompsons I had to turn the heater on for 30 min before lube would start to flow. 411 is far from brittle and it sticks to my boolits well it just rubs off...