I have them stored both ways. Usually if they aren't lubed and sized, it is because I haven't had time to do so.
I usually lube and size them before putting them in disposable food storage...
Type: Posts; User: That'll Do
Forum: Cast Boolits
I have them stored both ways. Usually if they aren't lubed and sized, it is because I haven't had time to do so.
I usually lube and size them before putting them in disposable food storage...
I highly recommend the RCBS 45-230-RN. I use lots of them in my 1911s. I also have the NOE H&G 34 clone, but I haven't had a chance to use it yet.
Here's a pile of the RCBS bullets for those who...
Forum: Cast Boolits
I used to clean my pistols after each shooting, but after not cleaning them a few times, and seeing that they still shot just fine, I only clean every 500 rounds or so. All I do is add lube to the...
I've used it a bit in 45 ACP. I worked up a couple loads with a 200gr SWC (Mihec's H&G 68 clone), and the results were satisfactory accuracy-wise. I did have lots of unburned powder, but that was to...
Forum: Cast Boolits
I believe there are a few members here that can make you a custom insert for the sizing die on your Lyman 450. Instead of the flat-faced punch inside the die, the custom one matches the bevel on the...
The only pistol brass I trim is 357 Magnum, and only when I use a particular bullet (Speer 180gr TMJ Silhouette bullet), because the bullet won't fit in my 686 when properly crimped.
All my rifle...
Another option would be to contact Erik at Hollow Point Bullet Mold Service: http://www.hollowpointmold.com/
Many members have used his services, with excellent results.
Forum: Boolit Lube !
Bullplate is the ticket. I have enough little bottles from the NOE group buy molds to last a lifetime.
On a related note, does anyone notice a difference between Bullplate, and the sprue plate...
Forum: Lead and Lead Alloys
So far, my ideal allow has been wheel weights, with just a little tin added. I only cast for handguns, and my fastest loads would be for a 357 magnum, around 1300fps. Wheel weights have served me...
Forum: Cast Boolits
I bought a pound of Herco back during the last component shortage, and while I haven't used it a lot, I did use it with the 358429, and I was surprised how accurate it was. But it meters somewhat...
I only have limited experience with IMR-4227. Never had a chance to do formal accuracy testing, just off hand stuff at 25 yards.
That said, I've used a 158gr LSWC (Saeco mold, can't remember the...
Forum: Cast Boolits
Thanks! I made that picture as the wallpaper on my computer. It looks pretty cool when it is really big.
I have the 6 cavity H&G 68 clone made by Miha. It is easy to cast with, and you'll have a big pile of bullets in no time.
I don't have any complaints about the mold. As long as I preheat it, and...
Forum: Cast Boolits
The only load I have for the 358429 and Universal for 357 Magnum is from the August 2007 Handloader magazines (issue #248).
It list a 173gr bullet, with 7.0gr of Universal with a regular small...
Forum: Cast Boolits
Shot 50 rounds each through my new(ish) 1911, S&W 686 Pro Series 5", and S&W 41.
No cast boolits in this outing though, I need to load some up.
Forum: Cast Boolits
I broke out the casting gear today. I've been shooting lots of 230gr bullets in my 1911's lately, instead of 200gr SWC, which is normally my bullet of choice.
I cast about 300 boolits from my RCBS...
Forum: Cast Boolits
That makes two of us.
My peeve is when people say "heads" or "pill" instead of bullet (or "boolit", but that's different can of worms).
I think I need to increase my medication......
Forum: Boolit Lube !
As a few others have said, lube does not need to be a sticky, tacky mess.
I use Lars Carnauba Red in my RCBS LAM2, and it isn't stick in the slightest. I need to heat it, but only in the colder...
Forum: Cast Boolits
Another idea would be to download the .pdf file to a CD or USB flash drive, then take it to your local FedEx Office (formerly known as Kinko's) or Office Depot or Office Max, and have them print it...
Forum: Cast Boolits
My casting/reloading area is much, much too small for me. It's about 3 ft. x 6 ft. in the garage. I'm buying a house later this year, and I intend on having a dedicated reloading/casting area. My new...
Forum: Cast Boolits
My most recent effort, about 500 of the RCBS 45-230-RN, which has been a great boolit in all of my 1911s.
http://i1124.photobucket.com/albums/l564/BME5101982/Cast%20Bullets/IMG_0226-1.jpg
As far as lubricants go, everyone has their own personal preference, and for the most part, it seems that all of them do a good job.
I use either M-Pro7 Gun Oil LPX. If that isn't available, I use...
I use a Shooter's Ridge Pistol Rest.
It works pretty well, of course the most powerful loads I shoot are the occasional heavy 44 Special load. The majority of my shooting is 357 Magnum and 45 ACP....
Forum: Boolit Lube !
Glenn is a good gentleman who makes an excellent products at an excellent price.
So far I've used Carnauba Red and 50/50 lubes, and I've been pleased as can be. I will definitely buy all my lube...
Forum: Boolit Lube !
My RCBS lubrisizer is kept in my unheated (but well insulated) attached garage. As long as the temperature is 68 degrees F or higher, I don't need to use a heater.
I usually do use a heater, but I...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |