Search:

So target is ShootSteel 3/8 AR 550 its a 12x20 inch sliloette.... 10 hits 100yds Winchester white box M193 circled in red fired from a BCM Recce 18in barrel, the green circle is 7.62 x 39 Wolf fired...

Moderator please close out the thread , thanks

khmer6 please check you pm

Hey Guys, no longer reloading, so selling off my brass inventory, shipping in Med Flat Rate boxes to your door, shipping included to CONUS addresses. No Nickel brass, all yellow range brass most is...

Sold to Trails4u........ please close the thread

• Winchester Large Pistol Primers 10,000
• Federal Large Pistol Primers 19,000
• Winchester Small Pistol Primers 10,000
• Federal Small Pistol Primers 8,000
• CCI #34...

Lead 1.00 per pound. Tin 8.00 per pound total, assuming a 2lb bar, $9 a bar

Federal and Winchester at my go to primers

Everyone please review this for accuracy let me know if I've made any errors or need to add updates. Its kind of scary we only have three powder plants in North America, IMR Canada, Alliant...

Zombie thread back to life after 13 years

Sunday bump

a question was asked about the brass, the 10mm was bought new by me in either factory or new brass form, so 1 or 2 fired, the other brass just don't know, treat as range brass, and priced as such.

Sold to LubeDude

For sell $95 for whole lot shipping included med flat rate box. Paypal, mo, or cash

750 pcs of Nickel 10mm
950 pcs of Nickel .38 Spec
150 pcs of yellow .357
35...

My Henry works well with .432 sized

Midway, Lyman single cavity rebuild kit about 10 bucks

Industrial shot peening is a process used to remove residual stresses in metals. Just isolating the tumbling of brass with the ss pins. This is a net removal of stress in the brass. If anything...

Thanks Panman payment via money order for the final 6 boxes will go out in the morning certified mail probably take 2 days to get to PA.

panman pm'ing you about the remaining six boxes

I'll take #10 both boxes of cow ingots $110 + shipping

I purchased a small lot of .44 sp brass WW, WRA definitely old and it had 25 balloon head cases REM-UMC with no extractor grove, The minute I looked in the case I new something was odd with primer...

I'll take the 600 ps of .32 acp and the 111 pics of 44 split, PM coming

I have 1006s, 610s and Deltas, favorite cast bullet for 10mm brass is the RCBS 200 gr SWC, or the 175 swc, I have a 180LRN for the autos. Use mild taper crimp for the pistols and revolvers. ...

I prefer to cast at 725 to 750 tops, frosted bullets happen when you build too much heat in your mold, if you are cycling your mold or molds too fast you will start to see the bullets drop frosty. ...

244650

I finally finished up my project molds I found 3 old dual cavity Lyman wadcutter molds on Fleabay. The first two had some rusting and needed cleaning, the Ideal 358-432c was in like new...

3 hrs prior to lunch then another 3 hrs after...that's my max, 800-1000 max production.