I was using single based AA 2495 26.0 grains with the 31141 (weighs about 183 grains with gc) and rechecking published loads due to a temp 2495 powder 49shortage, noted that AA 2460 gave almost...
Type: Posts; User: emmett22405
I was using single based AA 2495 26.0 grains with the 31141 (weighs about 183 grains with gc) and rechecking published loads due to a temp 2495 powder 49shortage, noted that AA 2460 gave almost...
Forum: Cast Boolits
0 replies to this query on another site. I have zero luck calculating or, more importantly finding bc's for the magma molds boolits in: 30-30 165 gr 0.308 diam., 40-65 260 grain .408 diam., 300...
Forum: Completed Deals
I need the cross- pin version (with the pin) for a non takedown Win Commemorative and it seems everyone who makes or sells them is out
Thanks
Forum: Leverguns
well I just ordered 250 rds of 30-30 from starline--and heard earlier this year they were going to come out with 32-40
Forum: Black Powder Cartridge
Barnabus I have the Winchester traditional sporter highwall made by Miroku (nb a pistol grip version, not the usual straight grip) in 38-55 that won an 500 yd offhand gong match match using a 250...
Forum: Black Powder Cartridge
Cat in general for smokeless loads bullet should be at least 1 to 2 thousand over your groove diam and can be soft (say 20-1) or hard alloy. For bp loads can be just under groove if a soft alloy up...
Forum: Completed Deals
Cm if it is still f/s i will take it thanks pm also
Forum: Leverguns
The common wisdom for best accuracy with Microgroove rifling is hard bullets, (+1 or +2 thou) oversized to bore, long bearing surface all readily obtained in your Lee bullet mold BUT not too high a...
Forum: Black Powder Cartridge
Plus 1 on what LGibson says. My old Uberti Iron Frame Henry loves the Desperado .428 in both 200 grain and 240 with smokeless --a SAMMI safe load involves reloader 7 if you are interested pm me. For...
Forum: Leverguns
BA or anyone-- I am trying to learn more about the Pedersoli that you have and the Uberti version. They have different SKU and UPC nos and the Uberti is reported at 9.1 vs 9.8 # for the Pedersoli....
Forum: Black Powder Cartridge
Posted this already but it disappeared. I had fun with the Accurate molds # 36-155c i believe designed by John Kort expressly for bp in the 38/357 in my Uberti 73 Win in offhand gong matches at 200...
Forum: Completed Deals
Mike I have a straight grip butt stock (uncheckered) from an 1895 CB that i just converted to pistol grip. I also have a forend for an 1895 GBL (checkered) that unfortunately is not the same length...
Forum: Cast Boolits
thanks all for input
i forgot to post that i had tried 3x for one hour each and still no joy; each time using brake cleaner and scrub brush .
I will scrub more with detergent and smoke moulds and...
Forum: Cast Boolits
Have been using Saecos in 40 and 45 cal for years and they work fine.
I just got the lyman 335 gr for 38-55 and the Snover in 40 cal and I cant get either one to fill out the bvullets. I have...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |