Search:

Hhmmmm thinking the model 71 Winchester, 348 w/235 gr cast would be fun to work with up there!!!!
Charlie

If I owned a 32 Mag I would certainly use it, shot placement is the key to anchoring any critter hell bent on taste testing you. I would be forced to use my 41 Mag as that is what I have, along with...

I have 2 flats, $16.75/box on case quanity. Have another order in for 3 more flats as the grand son is getting and itchy finger.
Charlie

Looks as though that is the deluxe model 71, same as the one that found its way to my gun safe Saturday. I'll look at mine and see if there is anything I might add. Interesting info that Pietro put...

Be aware that the NOE 265gr maybe to long in the nose. I have found with my carbine that I can not go over .310 from nose to crimp groove. I am looking at getting mold 240A from accurate, .300 to...

Use them as cast, do not harden. Little over kill and if you want the boolit to mushroom cast as is!!
Charlie

I think you're first quote says alot on this issue, my bore is not the best or a little rough. Lap the bore and then fit the bullet and you will find a clean bore there after.
Charlie

Accurate mold 45-160S is in the book. See what you think
Charlie

I have the Lee 175TL in both 2 cavity and 6 cavity. It has served me well and I also have the 145 standard groove mold that I really like. When the time comes and you can afford a better mold you...

Got my 45 cal mold back form Erik, needed HP alterations on both cavities. One was at .281meplat and the other cavity is the same nose configuration but slightly longer, leaving about .2 meplat. He...

For deer the 243 can be loaded down or push along with heavy bullets much better than the 22's. Not to say they can't do the job, just that the 243 can do it better. You can buy in any configuration...

that is one i'm running low on currently. have to start looking for some soon.
Charlie

Something like that will give a man a bad hair day!!
Charlie

Well find a randsom rest and 24 gr of WW296 behind the Hornady 240gr XTP and tell me how they group. If it doesn't shot with that load sell it and don't look back!! As far as shot placement with the...

Leading with #9 shot out of a squib load, gotta be kidding me. run some jacketed stuff through there and all should be well.
Charlie

nice being in the right place at the right time!!!!!
Charlie

Yep,
Sounds like an episode I had In Wisconson. Pulled into the camp area early and set up in back to keep things quiet, well that went to hell in a handbasket. Got back from a ride and 4 young...

Here again this would be the Howa barrel/action. Also a note on today's ammo, it is much better than we had 40 yrs back!!
Charlie:smile:

Back in the 70's the Remington 700 ruled supreme, but today I'd look at the Savage. Another option is the Howa rifle, I have 2 and they will shoot. Must admit that most all of my rifles except for...

Seperate the line type from the single type and melt down into ingots. Then if you have a scrap yard close have them x-ray your ingots for tin and antimony content. Then you'll know
Charlie

Dewey Rods haven't tried the Montana Extreme but look good.
Charlie

Sorry Don didn't mean to hyjack the thread, please call Dillon
Charlie

Don,
Call Dillon's tech support, best phone call you'll have and let them now you don't know s*#! about this press, that way they now where to start. These guys are very good and know their...

i got a Lee mold that was a group buy off the site for the 480ruger 400gr keith style and it was casting out of round, so after looking trhings over there was a pin that had dropped back some....

Green mountain bbl works, should be 1 in 60"
Charlie