I do have a 230 45 acp bullet also
Type: Posts; User: sixpointfive
Have some 5gr 700x but they are sized .454 for my s&w revolver. This Uberti is slugging our at .450. I do believe .004” is too much to push
Just picked up this revolver last week. It seems to have a .450 bore. I have 200rnpf and 250 Keith bullets. Would like to try the rnfp bullet first. I have a few powders such as h110, unique, wc820...
Forum: CB Loads / Military Rifles
Has anyone tried the noe 195 gr bullet for the k31? I’m going to be running 2400 powder. Load data is scarce. Thanks
Forum: Leverguns
Looking at ending up with a front sight 1/8” tall
Forum: Leverguns
The barrel is 22” long, let’s say 10” at 25. Shooting Noe 165 at 1700 fps
Forum: Leverguns
With my rifle I’m shooting 12” low at 25 yards with newly installed Williams fool proof aperature sight installed on rear and Max’d out on “up”. I hate to file on the “sour Doug” sight on front. What...
Forum: Factory Rifles
Always have to ream necks when I did 300 cases using federal 308 brass. Necks were greater then .015” thick. I shoot these out of a savage 99 and any thicker necks wouldn’t chamber
Forum: Leverguns
Fired the rifle today with NOE bullet made for 300 savage. 17 grains of 2400.
249036
249037
249037
Forum: Leverguns
Fired the rifle today at 50 yards with NOE 165 grain bullet made for 300 savage. 17 grains of 2400.
249036
249037
249038
249039
Old load dats starts out At 17 gr and goes to over 20 of 2400
248954
I think I know what you mean. You will see the imprint of the rifling in the outside of the bullet like when determining oal. If it doesn’t fit the throat then the bullet will be very deeply seated...
Forum: Leverguns
Would like to use 2400 powder
Bullets I have;
311291 Lyman 170 gr
312-160 lee 160 gr
Lyman 120gr 30 carbine bullet
Now 311165 30-30 bullet
Forum: CB Loads / Military Rifles
Anyone have min and max powder charges and best load using 2400 powder
I want to shoot the rd311165 in my 300 savage 99. Will 16 grains of 2400 be a proper load?
Forum: CB Loads / Military Rifles
Steel plate plinking with open sights 50-200 yards
Forum: CB Loads / Military Rifles
I just bought a savage 99 in 300 savage. What bullet would work best? I have the following:
Noe 311165 (30-30 bullet)
Lee 312-165 (sks bullet)
311291 170 gr Lyman
Lyman 311359 120 gr (30 carbine...
4.8 gr unique and 105 swc is very accurate in my p38 I just tested today. I did have some failure to feed issues though. Can you look at my seating depth and provide suggestions . Thanks , I’m at...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |