Search:

Thanks for the input on the cartridge, but we are really interested in some bio info in regards to his years as a gunsmith.

Regards,

Scott

Thanks...I corrected that.

Scott

A friend just acquired an interesting rifle.

Czech. VZ24 action
Caliber .22 Newton
Barrel is heavy sporter contour 1-10 twist
Marked B. E. Cottrell

Mr. Cottrell was a gunsmith during the...

I`ve never seen a four digit number on any Weaver scope base, nor a machined steel base like that from them. I even looked thru my 1978 scopes catalog and nothing like that is listed in the scope...

VooDoo,

That a question I wished I had asked Doug (Floodgate) when he still was posting here.

Regards,

Scott

When I started casting in the early 90`s, the first mould I bought was found at the Creekside gunshop here in NYS.
It was a very old 358425 single cavity w/o the box. So old that it had the flat...

I found this helpful...

blackirondude.blogspot.com

Bore foam works and reduces the scrubbing. I fill the bores with foam, then place a folded paper towel on the floor and stand the muzzles down down on the towel and wait overnight...when the blue...

The first time I had an opportunity to borrow a borescope I peeked at everything here, rifles and pistols. Man, what an education that was!
Noticed that the Hoppes was not doing the job on the 1903...

It`s been mentioned elsewhere, and not in a positive way. (Oh well)

There are so many new members here that may not know the 110`s history...and I can not find a good link to the 1958 American...

The Herter`s Model 3 Super is 1.25x18 thread.

Jerry,

I have an Ideal adjustable core mould available. It`s a 30S. Let me know if this what you are looking for.

Regards,

Scott

This one...?

http://backissues.com/issue/American-Rifleman-August-1975

Regards,

Scott

The V12 Variable was made from 1968 to 1984. Weaver shut down in `84 due to the flood of import competition. Omark Industries took over in `88.

Can`t speak to value, as it needs repair. Try these...

That looked familiar so I just dug thru some things and found that I have one of those window posters. It measures 14"X11".

Neato!

I use a similar method as Ray.

I use alot of Frank`s Hot sauce and reuse the bottles. The caps are very snug fitting and easy to use for applying on cleaning patches for bore cleaning.

Have...

Has anyone tried the Lee C309-113F in an SKS? J-word bullets are a bit scarce now and have the itch to try this wee one (weight-wise) in my 1950 Tula. I suppose this one would require a higher BHN...

I have the earlier Saeco hardness tester with graduation marks with numbers and the sticker still on the body. Yours does appear to be a copy of same.

The body diameter of my Saeco is 1.00 inch,...

Not on dial-up service from my PC.

I can however, send pics from my iPhone to another...but it`s a bit much to ask for I`m sure.

Regards,

Scott

I got the steel mount and put a set of dovetail-Weaver adapters on and mounted a Leupuld 10X scope in low Burris Signature rings. Couldn`t be happier with it.

Regards,

Scott

I hope both barrels are stamped with the same serial number as the receiver. Extra barrels were hand fitted to the frames then stamped.

My 1st Model`s 2 barrels are. (rifle and shotgun)

Enjoy...

I acquired my Dunbar from a show vendor. I had to wait a year after asking him, as he had tired of taking such older presses to shows because no one showed interest in such. I had seen an early...

I always de-cap primers prior to tumbling. The small number of cases that have pins lodged in the flash holes are a minor issue...easily tapped
out with a small punch. It may be a bit anal, but for...

It looks the same as the current powder, minus the very dark color. I have a pound of the current powder and use it in an M&P 15.

I transferred both cans into an empty Varget bottle, peeled the...

I remember the earler BL-C (1) from "uncle" Dean Grennell`s prose. But dont recall the "C" being referred as cooler burning.

I`m eyeing this powder for use with my `52 K31 Swiss. I`ve recently had...