If you have a lathe, you can make your own in less than an hour.
Type: Posts; User: fast ronnie
Forum: Completed Deals
If you have a lathe, you can make your own in less than an hour.
Forum: Reloading Equipment
Whatever brand, it looks to be pretty solid.
Forum: Reloading Equipment
Not free, or from a dumpster, but got a 650 for $50 about a year ago. It looks real nice next to my 750.
Forum: Factory & Surplus Powder
I usually dispose of it about 4 or 5 grains at a time.
Forum: Military Rifles
30-06 to 8 x 57 conversion is very easy, just have a lot of trimming. I start on the band saw. A drill press setup with a collet holder and counter bore is what I use on my milling machine. (that's...
Forum: Reloading Equipment
I just found a can full of wet and REALLY dark brass under my bench. Wanted to see if I could save it. I normally run a little over a teaspoon of citric acid and the same amount of Armorall in about...
Forum: Completed Deals
Like to know if anybody here might have a .433 round ball mold?
Prefer a steel mold. I prefer a 2 cavity but could use a single. Please PM me if you have something.
Ron
Forum: Muzzleloading.
Just finished mine a couple of weeks ago. Took it to the range this week and shoots very well. Its' amazing how close it resembles yours including the color and grain. Hope yours shoots as well as...
Forum: Our Town
I'll be 70 in a couple of months, but still race a Top Fuel Drag bike. May be my last year or two, but not ready to give up just yet. Still in reasonably good health, but will have to put someone...
Forum: Our Town
We made marmalade last year with kumquats, but it has long since disappeared.
Forum: Gunsmithing Tips & Tricks
My usual is when the phone rings. It's not that I don't remember where I put it, but that I don't realize I put it down. There is a black hole in my shop floor somewhere. Like all good scientists, I...
Forum: Reloading Equipment
I use Armorall Wash & Wax with citric acid. That is the active ingredient in Lemishine and is a lot cheaper. I got 2 pounds from Amazon for about 10 bucks. Armoral comes from local auto parts store.
I loaned someone my Lee hand primer and they did me a favor by NOT returning it. I've been using an RCBS auto bench primer for anything I don't put in the Dillons. Even then, I sometimes still use...
Forum: Gunsmithing Tips & Tricks
I try to set tight on a go gauge.
Forum: Reloading Equipment
I've run into several.Most of them have had a red sealer around the primer. Have broken several primer pins on them, but a flash light will usually let you see them after cleaning with pins.
Forum: Completed Deals
I want thank you guys who have responded to my post. I have sent a couple of messages out, but have been gone all day. Will probably deal with this more tomorrow.
Forum: Coatings and Alternatives
I just boiled mine twice, but wanted to just re-lube instead of powder coat. Old lube was coming off because it was old and had gotten hot.
Forum: Reloading Equipment
I use a 750 with a case feeder. I really like it. I have several presses and what works best for you will depend on how many rounds you load of a given type at a time. I load 8 or 10 different setups...
Forum: Our Town
Sounds like you have two keepers!!!!!!!!!!!!!!:bigsmyl2:
I just ordered a .50 cal flintlock kit and am looking for suggestions for a round ball mold. It seems to me that I need a .490 or a .495 mold. twist is 1 in 56 with a 44 inch barrel from Colrain. I...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |